Jamie@dundonmotorsports

Have them mounted up, car is on the dyno putting the final tweaks on the GT4 race header tune. Should have it off by the weekend and the new monoblocks installed!

calvinchan

will these fit PCCB?

mooty

^ no, i tried it.

Jamie@dundonmotorsports

Unfortunately no...

iyee318

Pictures?

francisluu

Hey Jamie, are sets of the GT4 BBS Monoblocks available at the moment or are you waiting on another production run?

chasen1211

Here are some photos

iyee318

These look great! I would also like to know pricing and availability.

francisluu

@chasen1211 those look SO good

JAhmed

Holy craaaaaap those wheels look good...

DrPhil Gandini

Do the front wheels have spacers? They seem to be sitting out quite a bit at the top, and presumably you have some negative camber dialed in (-2deg or more)?
BTW, those wheels look fantastic!

Yargk

9X19 ET50 will sit out like that without spacers and even with a lot of neg camber, if the camber was achieved with shims on the control arm. This method of getting more neg camber doesn't really tuck the top of the wheel in as much as it moves the bottom of it out. Camber plates can help tuck the top in though...

Jamie@dundonmotorsports

Our GT4's gold monoblocks are mounted, but the owner wanted to wear out the stock tires before putting on the car. We'll try to get it slated in to get some pics.

Chasen, your car looks awesome!

GT4 monoblocks/set $6600 in silver or titanium
http://www.dundonmotorsports.com/por...-racing-wheels

and both are in stock.

ML///

Any other owners running these wheels and have photos to post?

DC640

Hows caliper and rear toe link clearance? Any running on the front air duct full lock to lock?