Factory Toe Links from Clubsport race car
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Factory Toe Links from Clubsport race car
Anyone know if the factory toe links from the CS will bolt to a regular GT4?
Thanks!
Thanks!
#3
I could Send manthey racing a mail on that. It them that mount extra equipment on them cars anyway. Got some info on that clubsport and now when you mention it I remember manthey was involved in the clubsport car.
Vehicle Description
Please find attached the official vehicle description of the Cayman GT4 Clubsport.
The car is produced in Osnabrück and will be completed by Manthey-Racing. Manthey will work as a service provider all around production of the car.
To offer the car to a larger range of customers and domain, the car will have different PAG options which can be ordered in addition to the basic version.
Please see the prices below.
Porsche Cayman GT4 Clubsport EUR 111.000,00
Air conditioning EUR 2.800,00
Recaro race bucket seat EUR 3.200,00
70 liter FT3 safety fuel cell EUR 7.300,00
100 liter FT3 safety fuel cell EUR 10.900,00
All prizes plus country-specific VAT.
Manthey-Racing will offer additional options - for example air jack system and fire extinguishing system - to the before mentioned PAG options.
The car has no GT4 homologation ex works but a GT4 homologation kit will also be available.
Vehicle Description
Please find attached the official vehicle description of the Cayman GT4 Clubsport.
The car is produced in Osnabrück and will be completed by Manthey-Racing. Manthey will work as a service provider all around production of the car.
To offer the car to a larger range of customers and domain, the car will have different PAG options which can be ordered in addition to the basic version.
Please see the prices below.
Porsche Cayman GT4 Clubsport EUR 111.000,00
Air conditioning EUR 2.800,00
Recaro race bucket seat EUR 3.200,00
70 liter FT3 safety fuel cell EUR 7.300,00
100 liter FT3 safety fuel cell EUR 10.900,00
All prizes plus country-specific VAT.
Manthey-Racing will offer additional options - for example air jack system and fire extinguishing system - to the before mentioned PAG options.
The car has no GT4 homologation ex works but a GT4 homologation kit will also be available.
#4
It's my understanding that unless you have a Chassis number for one of the CS cars you can't get parts for it. I could be wrong though so it's worth checking and seeing if you can source. Not sure where you are located but you need a PMNA contact if you are in the US. We do know that the 991 cup car parts fit the GT4 street car but the cost a ton and RSS has just as good of a part for way less.
#5
Answer from Manthey-racing...
Regarding your question, the GT4 Clubsport is using different wheel hubs compared to the GT4 street car and therefore it also uses different toe rods.
Unfortunately you can't use them plug&play for your car but we do have an adapted kit for GT4 street cars to increase camber front + rear.
Regarding your question, the GT4 Clubsport is using different wheel hubs compared to the GT4 street car and therefore it also uses different toe rods.
Unfortunately you can't use them plug&play for your car but we do have an adapted kit for GT4 street cars to increase camber front + rear.
#6
Addict
Rennlist Member
Rennlist Member
Thread Starter
Answer from Manthey-racing...
Regarding your question, the GT4 Clubsport is using different wheel hubs compared to the GT4 street car and therefore it also uses different toe rods.
Unfortunately you can't use them plug&play for your car but we do have an adapted kit for GT4 street cars to increase camber front + rear.
Regarding your question, the GT4 Clubsport is using different wheel hubs compared to the GT4 street car and therefore it also uses different toe rods.
Unfortunately you can't use them plug&play for your car but we do have an adapted kit for GT4 street cars to increase camber front + rear.