It's here! DMS Intake runners...
#122
I will try the Soul performance exhaust for 2.5” diameter with advertised little to no drone
The following users liked this post:
Soul Performance (05-08-2020)
#123
All GT3 centre exhausts drone on GT4 with race headers I understand. Mine does between c 2-3k and is quite intrusive. Solution is either use ight throttle or change down....change down always the answer. I understand the Dundon quiet drones too - but have not heard it, I am running a titanium GT3 RS, with cats, and the Dundon will be quieter I expect. I would be interested in hearing a non-droning exhaust option but am very happy with the performance of my car and happy to work around the noise!
The following users liked this post:
burnergt4 (05-07-2020)
#125
Rennlist Member
Yeah same here on the interest in a non-drone option. The extra power is very noticable (and in tunnels the sound is intoxicating!), so for the gains you get it's great that you've been able to work through it! I'm getting the DeMan 4.5L installed with race headers, so I'll have to put the GT3 center back on at some point to see if the extra flow does anything to mitigate the exhaust resonance.
The following users liked this post:
Rick DeMan (05-08-2020)
#126
Three Wheelin'
All GT3 centre exhausts drone on GT4 with race headers I understand. Mine does between c 2-3k and is quite intrusive. Solution is either use ight throttle or change down....change down always the answer. I understand the Dundon quiet drones too - but have not heard it, I am running a titanium GT3 RS, with cats, and the Dundon will be quieter I expect. I would be interested in hearing a non-droning exhaust option but am very happy with the performance of my car and happy to work around the noise!
The following users liked this post:
burnergt4 (05-08-2020)
#128
Rennlist Member
#130
Intake runners
#131
Rennlist Member
Thread Starter
Runners are working well. No issues with them and they do add some new found power from 3K to til redline. As some point when I get around to it, I do want a pro tune on it as I think the DMS tune has some more room to optimize.
The following users liked this post:
RobC4sX51 (12-08-2020)
#132
Anyone install these on a 987.2?
#133
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
The following users liked this post:
ekam (01-04-2021)