FS: GT4 shift knob -new
06-15-2018, 09:31 AM
#1
Three Wheelin'
Thread Starter
FS: GT4 shift **** -new
i just took delivery of my Carrera T with LWB and full leather w deviated stitching. The Carrera T alcantara boot does not have the stitching so I ordered a GT4 shift boot from Suncoast. I did the change out, 10 min job, and therefore I’m selling just the know. So if yours is damaged and you don’t want to spend $450 for boot and ****, I’m selling the **** for $200.
Please PM me as I don’t check back here often.
06-15-2018, 09:35 AM
#2
Three Wheelin'
Thread Starter
To change shift boot.
Below shifter and under the boot, there is a locking plate, twist counter clockwise 45deg. Pull up on shift ****, then insert a thin upholstery tool in front leading edge slightly off center (ie away from seam since thicker there). Now pull up on shift know and pry up with upholstery tool. Pops right off. When off, there are four locking plastic pin under ****, squeeze together and separate **** from boot.
Below shifter and under the boot, there is a locking plate, twist counter clockwise 45deg. Pull up on shift ****, then insert a thin upholstery tool in front leading edge slightly off center (ie away from seam since thicker there). Now pull up on shift know and pry up with upholstery tool. Pops right off. When off, there are four locking plastic pin under ****, squeeze together and separate **** from boot.