Carbon Fiber GT3RS Style Fenders for 981 GT4
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Carbon Fiber GT3RS Style Fenders for 981 GT4
RL,
We have been working on these fenders for quite some time with our Carbon partner and they are finally ready for release, the results are nothing short of amazing. They are constructed of Motorsports grade Carbon Fiber and are a direct fender replacement for your stock application. The RS style vents are available in Satin or Gloss finishes. We look forward to helping you with all of your carbon needs.
Here is link to another post with photos of the installation process ( Enjoy )
https://rennlist.com/forums/987-981-...l#post14733008
__________________
The following users liked this post:
porscheflat6 (11-02-2020)
#2
RL,
We have been working on these fenders for quite some time with our Carbon partner and they are finally ready for release, the results are nothing short of amazing. They are constructed of Motorsports grade Carbon Fiber and are a direct fender replacement for your stock application. The RS style vents are available in Satin or Gloss finishes. We look forward to helping you with all of your carbon needs.
Here is link to another post with photos of the installation process ( Enjoy )
https://rennlist.com/forums/987-981-...l#post14733008
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The Fit and Finish is OEM Quality and is a one to one replacement for the factory fender. I would assume that a bodyshop would charge between $700-$800 for the paint and 5-6 Hours for installation. The most time consuming part is timing the inner fender liner around the vent in order to make them functional to dump the air.
#4
Burning Brakes
WOW!
#6
Looks great - people should be aware before purchasing that you'll have to blend the hood, bumper, and doors if you have anything but black or white paint. I'm sure you can find a shop that will paint and hang the fenders without blending but it's not going to match 100%. Probably a $5k job, easily.
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Looks great - people should be aware before purchasing that you'll have to blend the hood, bumper, and doors if you have anything but black or white paint. I'm sure you can find a shop that will paint and hang the fenders without blending but it's not going to match 100%. Probably a $5k job, easily.
Trending Topics
#8
Three Wheelin'
Looks great - people should be aware before purchasing that you'll have to blend the hood, bumper, and doors if you have anything but black or white paint. I'm sure you can find a shop that will paint and hang the fenders without blending but it's not going to match 100%. Probably a $5k job, easily.
#10
Standard procedure for panel replacements is to blend all adjacent panels except in the case of plain white and black paints. Metallic's are near impossible to match without blending - there's just too many variables. That yellow does not appear to have any flake which makes matching much easier. The fenders look awesome though.
#11
Rennlist Member
Do rules allow you guys to use these on your club sports for CTSC? if so will you run them?
#12
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Consists of:
Carbon Front Bumper
Carbon Rear Bumper
Carbon Fender set with new lighting package.
#13
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Consists of:
Carbon Front Bumper
Carbon Rear Bumper
Carbon Fender set with new lighting package.