What did you do to your GT4 today?
#1667
As long as the plastic string doesn't break off from my gas cap, I have no complaints. It's one of the under appreciated things in life ever since I lost the gas cap on my geo metro in high school.
#1669
Rennlist Member
^^ Looks like a car-guy version of heaven on earth!
#1670
Rennlist Member
Houndstooth seat inserts. Something I’ve wanted for years. Tried to get them on my Club Coupe, but that wasn’t allowed. Very happy with the result. Totally indulgent. Driver side installed.
#1676
Rennlist Member
Install took me two days only because IPD sent me a badly cut Y-hose and I had to wait for them to overnight me a new part. That aside, being careful and taking my time, ~4 hours. No special tools needed, just patience and taking your time to wiggle out and wiggle in the plenum. The DIY link below helped me a lot. Also, if you are not a 6' and 225lbs, being wedged in the trunk to do the work wouldn't be so bad... Feel free to PM me if you have questions with the install.
http://porsche.juhavehnia.com/2016/0...tallation.html
http://porsche.juhavehnia.com/2016/0...tallation.html
#1677
Install took me two days only because IPD sent me a badly cut Y-hose and I had to wait for them to overnight me a new part. That aside, being careful and taking my time, ~4 hours. No special tools needed, just patience and taking your time to wiggle out and wiggle in the plenum. The DIY link below helped me a lot. Also, if you are not a 6' and 225lbs, being wedged in the trunk to do the work wouldn't be so bad... Feel free to PM me if you have questions with the install.
http://porsche.juhavehnia.com/2016/0...tallation.html
http://porsche.juhavehnia.com/2016/0...tallation.html
#1678
Rennlist Member
The trick/tip I can offer with the elliptical rubber bands is to spray just a little bit of WD40 between the band and plenum. That will make it easier to wiggle free one side and then you can pull it up freeing the plenum from the other band and intake hose. When installing the IPD plenum, I greased the bands with a dab of Vasoline to help with wiggling it into place. Wish IPD designed tabs so the sensors or vacuum control unit can just snap into place vs zip ties to secure them.
#1680
Rennlist Member
^^^^ so jelly... been cold and icy here in the dc area... however, that didn't prevent me from putting on some new shoes.. HRE RC103 purchased from GT4LIFER (aka Roger)..