When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Carbon ceramic brakes have always been a love-hate relationship in the track day community. They offer many benefits over cast iron brakes with the only real drawback being the replacement costs, even though they typically last significantly longer than cast iron rotors. The end result is track enthusiasts pursuing cast iron brake rotor conversions or spec’ing their cars with cast iron rotors, in the process giving up both braking performance and handling. As the Exclusive North American Distributor for ST Carbon Ceramic Rotors, we offer an alternative solution through ST’s innovative technology, where you can get all the benefits listed below of the ST carbon ceramic rotors and at a much more cost-effective price point
• REFURBISHABLE multiple times with an average expected lifespan of *12-15k track miles* with refurbishments
• Available for both PCCB (Yellow) and Cast Iron (Red) Caliper equipped vehicles without the need for replacing the calipers
• Better braking performance over PCCB’s and cast iron rotors
• Significant improvement in brake modulation over PCCB’s – better trailbraking
• Option to run a much more aggressive pad for track applications versus PCCB’s
• Approximately 50% less expensive than PCCB rotor replacements
• Average expected life between refurbishments of 4 to 5 thousand track miles
• Refurbishment of a complete ST rotor set costs less than the equivalent cast iron rotor replacements
• Significant reduction in brake pad wear compared to the PCCB rotors, and most cast iron rotors
• Operating temperatures approximately 200 degrees lower than PCCBs
• 50% less unsprung weight compared to the equivalent GT3/GT4 cast iron brake rotors
• Minimal brake dust compared to cast iron rotors for street use
.
. Fitment
• Applicable for both factory Cast Iron and PCCB equipped vehicles
• 991 GT3, .2 GT3, GT3 RS, .2 GT3 RS, GT3 Cup, 911 R, GT2 RS, Turbo and Turbo S
• 997 GT3, .2 GT3, GT3 RS, .2 GT3 RS, GT3 Cup, GT2, GT2 RS, Turbo and Turbo S
• 981 Cayman GT4 and GT4 Club Sport
• 996 GT3, Turbo and Turbo S
• Also available for most Ferrari models and some Aston Martin models
Pricing
(subject to change)
• Exclusive North American Distributor – AutoQuest Motorsports
• $12,998 per complete rotor set
• $600 per rotor for refurbishment (plus shipping)
***Expected ST rotor life is dependent on the following***
• Proper bedding
• Correct pads
• Timely refurbishments
• Factory brake cooling in place
ST is the carbon ceramic rotor supplier for Singer Porsches, Koenigsegg, and Aston Martin’s upcoming hypercar…the Valkyrie.
Please feel free to post, PM, email, or call me at my contact information below with any questions. I would be happy to work with you, and provide direct contact with current ST users : )
“I race a 2016 Porsche GT4 in Australia and have had the pleasure of receiving advice and technical support from John and Gavin at Autoquest who have helped with my race setup and getting the most out of this wonderful car. Most recently I fitted a set of Surface Transforms Carbon Ceramic brake rotors to the Porsche (supplied by Autoquest) and the results are outstanding. The brakes run noticeably cooler and combined with Pagid RSC1 pads there is zero fade and a great feeling pedal. The unsprung weight of approx. 23 kgs no doubt helps the suspension performance. Thanks John and Gavin I hope to keep working with you and the wonderful team at Autoquest to make my GT4 the best performing car down under”……..Tim Hendy 2017 Australian Tarmac Rally Champion
Remember the VW I.D. R that smashed the Pike's Peak Hillclimb record? Well this weekend it just beat the Goodwood Electric hillclimb record by 3.5 seconds and is going for the overall record next year.
This car is running ST ceramic rotors, and yours can too