Mark this thread as Unsold
For Sale: My Lost Your Gain New and Good Condition Parts
#1
Rennlist Member
Thread Starter
My Lost Your Gain New and Good Condition Parts
Purchases made but decided to go in different direction. All prices discounted and do not include shipping.
Tarett Under Drive Pulley & Belt - New; never installed . New cost $308 asking $250
Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track. The pulley is fully balanced and 4" OD at the belt tooth (a 27% reduction), the minimum OD to be BSR legal. Its weight has been optimized to be one of the lightest under-drive pulleys on the market today. Made from high grade aircraft quality 2024 aluminum, which is far superior to the lower quality pulleys on the market that are made from a lower quality material. An additional benefit is increased power and torque across the entire RPM range. The kit comes complete with the crank pulley and a new crank pulley bolt. Fits all 986, 987, 996 and 997 except 997S 3.8L or Turbo or GT3 or DFI (2009 on). A boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size. A smaller belt is needed and can be purchased separately, see accessories below. Part #UDP996-ERP - **Please note this part is manufactured by Eisenlohr Racing Products**
Steering Wheel with Airbag - came off 2003 Porsche Graphite Gray. Asking $550
LUX DMF (Dual Mass Flywheel). Asking for $650
This is a brand new in box LUK DMF (Dual Mass Flywheel) for PORSCHE 911. LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to Audi/VW, BMW, Mercedes and Porsche. Porsche sells the exact same flywheel for more than $1200. -Genuine LuK Part Number: DMF153 -Weight: 39 lbs. Made in Germany -Please note that only genuine LUK products come with a 12 month/ 12,000 mile manufacturer warranty. -Vehicle Application: 2008 - 2009 Porsche 911 Turbo (3.6L DOHC 6cyl turbo; 997.1) 2008 - 2009 Porsche 911 GT2 (3.6L DOHC 6cyl turbo; 997.1)
Radiator Screens - Never installed - New $275 Asking $245
One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.
Radio Surround - Asking $50
Perfect substitute if you want to send your original surround out to be painted, recovered, hydro-dipped. Came off of a 2003 996 Cabriolet
Spare Tire and Jack - Asking $200
Exhaust with Tips - Asking $300
Perfect substitute if you want to send them off to get a Fister modification - that's what I did - no down time. Came off of a 2003 996 Cabriolet
Tarett Under Drive Pulley & Belt - New; never installed . New cost $308 asking $250
Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track. The pulley is fully balanced and 4" OD at the belt tooth (a 27% reduction), the minimum OD to be BSR legal. Its weight has been optimized to be one of the lightest under-drive pulleys on the market today. Made from high grade aircraft quality 2024 aluminum, which is far superior to the lower quality pulleys on the market that are made from a lower quality material. An additional benefit is increased power and torque across the entire RPM range. The kit comes complete with the crank pulley and a new crank pulley bolt. Fits all 986, 987, 996 and 997 except 997S 3.8L or Turbo or GT3 or DFI (2009 on). A boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size. A smaller belt is needed and can be purchased separately, see accessories below. Part #UDP996-ERP - **Please note this part is manufactured by Eisenlohr Racing Products**
Steering Wheel with Airbag - came off 2003 Porsche Graphite Gray. Asking $550
LUX DMF (Dual Mass Flywheel). Asking for $650
This is a brand new in box LUK DMF (Dual Mass Flywheel) for PORSCHE 911. LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to Audi/VW, BMW, Mercedes and Porsche. Porsche sells the exact same flywheel for more than $1200. -Genuine LuK Part Number: DMF153 -Weight: 39 lbs. Made in Germany -Please note that only genuine LUK products come with a 12 month/ 12,000 mile manufacturer warranty. -Vehicle Application: 2008 - 2009 Porsche 911 Turbo (3.6L DOHC 6cyl turbo; 997.1) 2008 - 2009 Porsche 911 GT2 (3.6L DOHC 6cyl turbo; 997.1)
Radiator Screens - Never installed - New $275 Asking $245
One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.
Radio Surround - Asking $50
Perfect substitute if you want to send your original surround out to be painted, recovered, hydro-dipped. Came off of a 2003 996 Cabriolet
Spare Tire and Jack - Asking $200
Exhaust with Tips - Asking $300
Perfect substitute if you want to send them off to get a Fister modification - that's what I did - no down time. Came off of a 2003 996 Cabriolet
#3
Rennlist Member
Thread Starter
#6
Rennlist Member
Thread Starter