Mark this thread as Unsold
For Sale: 951 garage sale ITEMS ADDED to original post
#1
Thread Starter
Thefu
Rennlist Member
Rennlist Member
Joined: Sep 2003
Posts: 19,935
Likes: 658
From: 28*09'58.16" N, 82*35'17.07" W
951 garage sale ITEMS ADDED to original post
Update 6/10/09: 10% discount on remaining inventory.
Late Spring Clean-up. I need room so this stuff needs to go.
All items are OBO.
If you have a specific question about an item, or need a close-up photo to verify fitment, use, etc, please PM me with requests. All items are ready to be bolted up and used immediately except where noted.
Front turn signal assy, 951 (1 set) SOLD
Front side marker assy, 951 (1 set) SOLD
Rear side marker assy, 951 (1 set) SOLD
Wiper motor assy, all 944 (?) (1) $50
Oil pump, 951 (1) $50
Throttle body (1) $50
Camber plates, racers edge (1) NIB SOLD
Clutch release bearing, 951 (1) NIB SOLD
Shifter handle with rubber boot (1) SOLD
Fuel rails, 951 (1) $15
Intercoolers (2) $50
Starter motor, 951 (1) $50
Distributor cap assy, 951 (2) $25
Oil filter housing, 951 (1) $25
K26/6 turbo, with downpipe (1) no play SOLD
Cruise control motor (1) $50
Engine crossbar, 951 (1) $50
Transaxle crossbar, 951 (1) $25
Lower radiator shroud, 951 (1) SOLD
Intercooler shroud (1) $25
TiAL blow off valve, (1) NIB SOLD
Alternator, 951 (1) $75
Radiator w/ fans, 951 (1) $125
Coolant expansion tank, 951 (1) SOLD
Turbo coolant pump (1) $25
Bell housing, 951 (1) $25
Brake cooling ducts, 951 (1) SOLD
Window net (1) SOLD
5# halon w/ remote pull (1) SOLD
Carbon fiber rear bumper (1) SOLD
100x4 amp (1) SOLD
70x2 amp (1) $25
Cam tower, 951 (1) $100
Torque tube, 951 (1) $150
[B]M030 30mm fr, 19mm rr sways (1 set) SOLD
Head, 951 (1) $500*
Rear banana arms, 951 (1 set) $150
Water pump, 951 (1) rebuilt $75
Dial-in cam gear (1) SOLD
Valve spring installation tool, Snap-On $75
Injectors, 951 (1 set) SOLD
Tilton pedal assy (1) SOLD
Oil pan, 951 $50
added:
Fog light assy, 951 (1 set) SOLD
Spindles and hubs, non-M030 (2 sets) $100
3 bar adjustable fuel psi regulator (1) SOLD
Cat bypass "test" pipe (1) SOLD
"Cup" exhaust, cat back, straight pipe (1) $150
Door lock solenoids (1 set) $15
KEP pressure plate (1) SOLD
Aluminum flywheel (1) New SOLD
HKS EVC IV boost controller $250
Additionally, I have some other engine parts laying around including heat shields, turbo intake tubing, j-boots, etc. If you have a need, PM to see if I have a part for you.
All prices are again OBO, plus shipping from 33556. Paypal works best. Would rather not ship overseas, but if an overseas member has an interest in a part that does not have CONUS interest I will consider shipping.
Caveats:
• Head has some corrosion on the mating surface and will need to be either cut, or welded and cut to insure good sealing with head gasket. Head is otherwise rebuilt with new and/or reconditioned valves and valve springs.
Late Spring Clean-up. I need room so this stuff needs to go.
All items are OBO.
If you have a specific question about an item, or need a close-up photo to verify fitment, use, etc, please PM me with requests. All items are ready to be bolted up and used immediately except where noted.
Front turn signal assy, 951 (1 set) SOLD
Front side marker assy, 951 (1 set) SOLD
Rear side marker assy, 951 (1 set) SOLD
Wiper motor assy, all 944 (?) (1) $50
Oil pump, 951 (1) $50
Throttle body (1) $50
Camber plates, racers edge (1) NIB SOLD
Clutch release bearing, 951 (1) NIB SOLD
Shifter handle with rubber boot (1) SOLD
Fuel rails, 951 (1) $15
Intercoolers (2) $50
Starter motor, 951 (1) $50
Distributor cap assy, 951 (2) $25
Oil filter housing, 951 (1) $25
K26/6 turbo, with downpipe (1) no play SOLD
Cruise control motor (1) $50
Engine crossbar, 951 (1) $50
Transaxle crossbar, 951 (1) $25
Lower radiator shroud, 951 (1) SOLD
Intercooler shroud (1) $25
TiAL blow off valve, (1) NIB SOLD
Alternator, 951 (1) $75
Radiator w/ fans, 951 (1) $125
Coolant expansion tank, 951 (1) SOLD
Turbo coolant pump (1) $25
Bell housing, 951 (1) $25
Brake cooling ducts, 951 (1) SOLD
Window net (1) SOLD
5# halon w/ remote pull (1) SOLD
Carbon fiber rear bumper (1) SOLD
100x4 amp (1) SOLD
70x2 amp (1) $25
Cam tower, 951 (1) $100
Torque tube, 951 (1) $150
[B]M030 30mm fr, 19mm rr sways (1 set) SOLD
Head, 951 (1) $500*
Rear banana arms, 951 (1 set) $150
Water pump, 951 (1) rebuilt $75
Dial-in cam gear (1) SOLD
Valve spring installation tool, Snap-On $75
Injectors, 951 (1 set) SOLD
Tilton pedal assy (1) SOLD
Oil pan, 951 $50
added:
Fog light assy, 951 (1 set) SOLD
Spindles and hubs, non-M030 (2 sets) $100
3 bar adjustable fuel psi regulator (1) SOLD
Cat bypass "test" pipe (1) SOLD
"Cup" exhaust, cat back, straight pipe (1) $150
Door lock solenoids (1 set) $15
KEP pressure plate (1) SOLD
Aluminum flywheel (1) New SOLD
HKS EVC IV boost controller $250
Additionally, I have some other engine parts laying around including heat shields, turbo intake tubing, j-boots, etc. If you have a need, PM to see if I have a part for you.
All prices are again OBO, plus shipping from 33556. Paypal works best. Would rather not ship overseas, but if an overseas member has an interest in a part that does not have CONUS interest I will consider shipping.
Caveats:
• Head has some corrosion on the mating surface and will need to be either cut, or welded and cut to insure good sealing with head gasket. Head is otherwise rebuilt with new and/or reconditioned valves and valve springs.
Last edited by SeaCay; 06-12-2009 at 09:58 AM.
#6
Thread Starter
Thefu
Rennlist Member
Rennlist Member
Joined: Sep 2003
Posts: 19,935
Likes: 658
From: 28*09'58.16" N, 82*35'17.07" W
All PM's replied to. Those that have expressed interest in items will have priority in the order that I received your PM. If you have requested multiple items and some have already been sold, please respond to your reply so I can process your order and update the OP to mark items as sold.
Thank you!
Thank you!
Trending Topics
#8
Thread Starter
Thefu
Rennlist Member
Rennlist Member
Joined: Sep 2003
Posts: 19,935
Likes: 658
From: 28*09'58.16" N, 82*35'17.07" W
Updated sold, added more items.
Waiting on replies from those that expressed interest on certain items. If there are people waiting, what is a fair amount of time to hold a part that has dibs, yet no payment?
Waiting on replies from those that expressed interest on certain items. If there are people waiting, what is a fair amount of time to hold a part that has dibs, yet no payment?
#11
Thread Starter
Thefu
Rennlist Member
Rennlist Member
Joined: Sep 2003
Posts: 19,935
Likes: 658
From: 28*09'58.16" N, 82*35'17.07" W
I'll let you know what the other buyer decides.
Thanks!
#15
Thanks, let me know....