Mark this thread as Unsold
For Sale: Fikse Profil 13 and Hoosiers
#1
Moderator
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
One too many sets of wheels and R-comps, so this set is available:
Fikse Profil 13, forged.
18 x 9 front, offset 51mm, 18 lbs
SN: F732A611420732387 and 88
18 x 12 rear, offset 64mm, 20 lbs
SN: F732A611420732386 and 89
Wheels are in "as new" condition - Washed and waxed. High-temperature aluminum tape covering the wheel weights.
Tires: Hoosier R6, 245/40-18 front and 315/30-18 rear. Pretty much also as-new.
Original cost as seen mounted and balanced was about $7000. Asking $4,000, which is 43% off.
Will ship the Tire Rack method with foam sheet and cardboard protection via any shipper buyer arranges. Located in central CT.
Will fit 997, 997S and GT3 - all narrowbody 997s. Fit over PCCB.
Higher resolution photos available.
Fikse Profil 13, forged.
18 x 9 front, offset 51mm, 18 lbs
SN: F732A611420732387 and 88
18 x 12 rear, offset 64mm, 20 lbs
SN: F732A611420732386 and 89
Wheels are in "as new" condition - Washed and waxed. High-temperature aluminum tape covering the wheel weights.
Tires: Hoosier R6, 245/40-18 front and 315/30-18 rear. Pretty much also as-new.
Original cost as seen mounted and balanced was about $7000. Asking $4,000, which is 43% off.
Will ship the Tire Rack method with foam sheet and cardboard protection via any shipper buyer arranges. Located in central CT.
Will fit 997, 997S and GT3 - all narrowbody 997s. Fit over PCCB.
Higher resolution photos available.
#4
Moderator
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I believe so. If you look at Tire Rack for 996 GT3 wheels, you have to search around, but you can find 9" fronts with offsets of 43mm and 12" rears in 65mm offsets. So my rears are right on the money, but the fronts are off a few mm. I think I've read others using a modest 7mm front spacer to push the fronts out a little. Effectively, with a 7mm up front, mine would be like 44mm, which is right on the money. I know H&R makes a 7mm front and the photo of the product shows the set screw (to hold the spacer on the front in place) and longer wheel bolts. Price is about $85 for the pair.