15 minute instrument pod removal update and instrument light bulbs for an OK price
#92
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I should update and give Schocki's quick pod removal guide my official shortcut stamp of approval. Since my first failed attempt at doing this back in 2011, I have managed to figure it out. So, the steering wheel (and the tranny) can stay in place. It takes a bit of patience and finesse to get the pod to clear the ignition switch, but I have managed to get it all done under 15 minutes like Schocki said.
#94
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#95
Fantastic Post! And Now I need help...
Well as a down right amateur fiddler I found this post fantastic! All went great till re-assembly. Here's my symptoms on the 88 A/T: all lights for auto indicator work fine. signal left signal right work fine. Tach is erratic, oil gauge is erratic. Speedo is dead...gas gauge dead... light switch, hazards all ***** function but do not light up clearly I goofed and something is loose? Went through it once again but maybe I missed something? Any advice?
btw these were all things that DID work prior to dis/re assembly. Many Many thanks!
btw these were all things that DID work prior to dis/re assembly. Many Many thanks!
#96
Burning Brakes
Check your connections of the plugs behind the cluster. I think one of them maybe not seated all the way.
#97
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
In this pic there are 4 beige coloured holders (circled) located above 4 yellow bulb holders.
What do the beige lights illuminate?
I have a burned out light behind the right side red computer digital display. I'm guessing that would be one of the yellow holders with a light bulb with the red cap?
Rog - do you carry these bulbs? How much are they?
Thanks.
#98
Addict
Rennlist Member
Rennlist Member
In this pic there are 4 beige coloured holders (circled) located above 4 yellow bulb holders.
What do the beige lights illuminate?
I have a burned out light behind the right side red computer digital display. I'm guessing that would be one of the yellow holders with a light bulb with the red cap?
Rog - do you carry these bulbs? How much are they?
Thanks.
The other side of the PCB looks like this:
(large version)
You can see where the two rows of bulbs mate with the back of the information display:
(large version)
If you're going to replace bulb(s) anyway, you might want to consider upgrading to LEDs (see "Converting Porsche 928 Interior Lighting to LEDs", which is also useful for just learning more about the '89+ instrument cluster).