SmartyCam HD 2.1 - add steering angle to overlay?
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
SmartyCam HD 2.1 - add steering angle to overlay?
I have an AIM Solo DL and SmartyCam HD 2.1 in my GT4. Is there a way to add a steering wheel graphic to the overlay? Looks like steering wheel position data in on the CAN bus and in the Solo data but I can't find any steering wheel graphics to add to the overlays.
Thanks,
John
Thanks,
John
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
I have an AIM Solo DL and SmartyCam HD 2.1 in my GT4. Is there a way to add a steering wheel graphic to the overlay? Looks like steering wheel position data in on the CAN bus and in the Solo data but I can't find any steering wheel graphics to add to the overlays.
Thanks,
John
Thanks,
John
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#4
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
I'd inquire straight to Italy, but it is on the list that's been submitted by the US importer/distributor and top dealers worldwide.
I would, for one, rather them focus on the new Analysis software that would enable bringing up a synced video window within the data analysis window. THAT would help more than an animated steering wheel right now.
For most folks, I position the camera in such a way that I can SEE the wheel movement and that, combined with the number indicating the amplitude of the steering input for comparison and trend identification, is sufficient for my needs.
It's a nice setup for the GT4, for sure.
#5
One of the things that makes this kit easy to use is the preloaded graphics, dashes and measures in the configuration software. This is something that has been asked for, but as one of only three devices that renders this information live to the video, real-time, the processing power limits what can be done.
gear, steering angle, throttle position, brake position, speed and revs.
Not bad I must say.
#6
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
MoTeC HD V2 can't do that. Yet.