AIM firmware version issue
#1
Drifting
Thread Starter
AIM firmware version issue
In RaceStudio3, this is what I see for firmware versions (I have an MXL2):
But according to the version history, 1.22.13 just was released yesterday.
Not sure why it's not seeing 1.22.13.
Thoughts?
But according to the version history, 1.22.13 just was released yesterday.
Not sure why it's not seeing 1.22.13.
Thoughts?
#2
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
I think that is a mistake. Try downloading the firmware update and I think you will see you actually have 1.22.14 available. I got this release on Friday and I get a similar screen.
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
Unless it's 3.10.10, it won't update the firmware to .14
We see what it says on the update screen, our question is when you open RS3, does it say 3.10.10 on the top left of the active window?
We see what it says on the update screen, our question is when you open RS3, does it say 3.10.10 on the top left of the active window?
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#6
Drifting
Thread Starter
So what exactly is the latest rev? Is it 1.22.13 or 1.22.14? Website seems to indicate 1.22.13
#7
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
The latest is 1.22.14. The .13 was a typo.
I'm working with the guys in Italy to see what is going on. I have 1.22.14 on my computer, but it shows the latest available is 1.18.22. I'll report back as soon as I hear what they find.
I'm working with the guys in Italy to see what is going on. I have 1.22.14 on my computer, but it shows the latest available is 1.18.22. I'll report back as soon as I hear what they find.
Trending Topics
#8
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
Enrico explains it thusly: "This is how it has to work: for upgrading the systems you need to upgrade the software. Then you have the fw in your pc and upgrade the system. This because, as I wrote, the new fw requires the new tracks, that the old software didn't manage. In this way we avoid the users to upgrade the fw without upgrading the software.
Enrico Rosignoli
Aim s.r.l."
Enrico Rosignoli
Aim s.r.l."
#9
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Did you get this resolved? I just did it on another unit in the office and it worked as described above. You have to reinstall all your tracks too through RS3. This is due to the new way they are managed.
#10
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
I did it on a Surface Book that hadn't been updated from 3.08 yesterday and it worked perfectly.
I have not connected to a dash, yet.
I have not connected to a dash, yet.
#11
#12
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Good question! I do not believe so and haven't been told that, but I will have to check. The change for GPS manager to RS3 for the MXL2, MXS, MXG, and Mychron 5 is because the new track profiles contain more info and eleminate the need for the track width (among some other things).
I will check/find out and see.
I will check/find out and see.
#14
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
3.10.12 and 2.55.68 has been released here. http://www.aim-sportline.com/eng/download/software.htm
jlanka, have you turned it on FROM the dash menu and connected TO that AP network (the dash serial number) with your laptop?
jlanka, have you turned it on FROM the dash menu and connected TO that AP network (the dash serial number) with your laptop?
#15
Drifting
Thread Starter
3.10.12 and 2.55.68 has been released here. http://www.aim-sportline.com/eng/download/software.htm
jlanka, have you turned it on FROM the dash menu and connected TO that AP network (the dash serial number) with your laptop?
jlanka, have you turned it on FROM the dash menu and connected TO that AP network (the dash serial number) with your laptop?
I still have this strange situation with the versions even after upgrading to 3.10.12. Probably don't need to worry much about it, but it's odd nonetheless. The "on web" versions still have an older rev even though "on PC" has been updated to the 1.22.16