Quesion on sample rates
08-13-2015, 11:04 PM
#1
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
Quesion on sample rates
Hi All,
The AiM EVO4 list the sample rates as 4K. Is this aggregated for all A/D channels or is it per channel. How wide are the A/D's?
The Race Technology DL1 club has a listed sample rate of 1Khz - same questions?
Thanks
Ray
The AiM EVO4 list the sample rates as 4K. Is this aggregated for all A/D channels or is it per channel. How wide are the A/D's?
The Race Technology DL1 club has a listed sample rate of 1Khz - same questions?
Thanks
Ray
08-13-2015, 11:17 PM
#2
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
The Evo4 is 1,000 Hz per channel with a maximum total bandwith of 5,000 Hz.
The A/D is 12 bit. I believe all the of them, regardless of brand, are 12 bit.
If you need more bandwith, you could go to an MXL2, MXG, or MXS. You could also wait for the Evo5. MoTeC with the right setup can do far over the 5,000 Hz but you will have to pay for it and have upgraded memory and logging.
The A/D is 12 bit. I believe all the of them, regardless of brand, are 12 bit.
If you need more bandwith, you could go to an MXL2, MXG, or MXS. You could also wait for the Evo5. MoTeC with the right setup can do far over the 5,000 Hz but you will have to pay for it and have upgraded memory and logging.
