swisspol

Hi everyone!

Here's my setup:
- 718 GT4 RS
- AiM Solo 2 DL (connected to ECU)
- AiM SmartyCam 3 Sport (connected to the Solo 2 DL)

When I download data into the RaceStudio 3 software, I download the session data from the Solo 2 DL using WiFi and then the video data from the SmartyCam 3 through the SD card. This creates 2 sessions, one with data and one with video, instead of a single session with data + video. So if I do analysis on the first one, I don't see the video and if I do analysis on the second one, I don't have all the data, only what was transmitted from the Solo 2 DL to the SmartyCam 3.

What am I doing wrong?

Thanks!

ProCoach

Are the tracks the same in Race Studio 3 Analysis file listing after downloading?

swisspol

Ah, these sessions have no tracks associated at all. That's because I'm just testing the setup while driving around in the neighbourhood.

ProCoach

I haven't tried that before?

Take a look here.

swisspol

Will do. But in case of a "real" session at a track, both data and video will end up together as a data+video session, even if downloaded separately?

ProCoach

Yes.

swisspol

Awesome, thank you very much for your help!

Matt Romanowski

It should all link automagically when the tracks show the same. Since you have no track, it won't work quiet right. You can make a custom track for testing and load it in the S2DL. Then do a few laps and the import should work correctly. For sessions that don't link, you can select both (don't open) and then right click. There is an option to link them. This will work for your no track neighborhood runs.

Post back here if you have more problems and we can get you squared away.

swisspol

The manual linking did the trick and also I did more "runs" around the neighborhood and some sessions did auto-magically link indeed. Go figure. Thanks again for all the help!