GPS Disconnected after update
#1
Racer
Thread Starter
GPS Disconnected after update
I have an MXL2 with a 4 way data hub connected to the CAN EXP. I have a GpS08 and SmartyCam GP 2.1 connected to the data hub. I had to send my SmartyCam to AiM for a hard reset/reboot. When reconnected and booted the SmartyCam searched and locked onto the GPS satellites.
I then updated the RS3 software, MXL2 and SmartyCam firmware and reloaded the tracks to the SmartyCam. The SmartCam now says that the GPS is disconnected which it obviously isn’t. Can anyone point me in a direction to troubleshoot this? Thanks
I then updated the RS3 software, MXL2 and SmartyCam firmware and reloaded the tracks to the SmartyCam. The SmartCam now says that the GPS is disconnected which it obviously isn’t. Can anyone point me in a direction to troubleshoot this? Thanks
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
Reach out to the folks at AiM Roanoke or Lake Elsinore. Not uncommon.
1-800 718-9090
1-800 718-9090
Last edited by ProCoach; 08-08-2023 at 09:34 AM.
The following users liked this post:
ProCoach (08-08-2023)