date and time on Aim MXL don't update
#1
Rennlist Member
Thread Starter
date and time on Aim MXL don't update
After I set the current date and time on my Aim MXL, when I check it the next day it has not updated to the current date and time. I do have the GPS08 connected to it.
Should it update and have the correct date and time the next day?
thanks
Dave
Should it update and have the correct date and time the next day?
thanks
Dave
#2
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
If it's an MXL Pista, you need to set the time with RS2. Then if it won't keep it, I believe there is a battery in the dash that loses power eventually. You might just need that coin cell changed.
#3
Rennlist Member
Thread Starter
In Race Studio on the device Configuration page, there is a "Set acquisition system time"
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
#4
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
In Race Studio on the device Configuration page, there is a "Set acquisition system time"
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
The time transmit only does the time. It will not disturb your config.
This is an old Pista, correct?
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,180
Received 3,346 Likes
on
1,900 Posts
In Race Studio on the device Configuration page, there is a "Set acquisition system time"
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
Once I set that from the PC time, do I need to transmit the configuration again to the Aim MXL? If I already configured it, will it hurt to re-transmit the configuration.
I can't find any reference online or in the user manual for a coin battery in the Aim MXL?
thanks
Dave
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#6
Rennlist Member
Thread Starter
yes an old MXL pista
I have sent the computer time to the Pista, but the Pista does not update, when I check later the old time when I sent the computer time is still in the Pista
I have sent the computer time to the Pista, but the Pista does not update, when I check later the old time when I sent the computer time is still in the Pista