Laguna Seca 718 GT4 Clubsport MR Hot Laps
07-20-2019, 02:24 AM
#1
Burning Brakes
Thread Starter
Laguna Seca 718 GT4 Clubsport MR Hot Laps
My first time at Weathertech Laguna Seca in my new 718 GT4 Clubsport MR during Kahuna at Laguna with PCA Club racing GGR.
Having some braking issues as the brakes were getting really spongy during these qualifying laps but hopefully by tomorrow that will be worked out before the big race.
Hope you enjoy and stay tuned as I will be uploading tomorrows race very soon.
P.S. Still working out the bugs with my VBox since they do not currently offer a protocol for the 718 CS.
Having some braking issues as the brakes were getting really spongy during these qualifying laps but hopefully by tomorrow that will be worked out before the big race.
Hope you enjoy and stay tuned as I will be uploading tomorrows race very soon.
P.S. Still working out the bugs with my VBox since they do not currently offer a protocol for the 718 CS.
Last edited by GT345; 07-20-2019 at 02:53 AM.
07-20-2019, 07:45 AM
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,677
Received 2,833 Likes
on
1,670 Posts
It’s odd, that protocol is using the same .dbc for CAN that works in at least four other MR’s, the cable pinout is correct and you’ve switched the CAN polarity with no change. There could be an issue internally with the patch cable. Will look into sending another.
07-20-2019, 08:22 AM
#3
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Nice session. Did you make the scene file? It will be good when it's all working and you have throttle and brake.
Is that a Solo or Solo DL you have?
Is that a Solo or Solo DL you have?
07-20-2019, 10:07 AM
#4
Burning Brakes
Thread Starter
07-20-2019, 03:48 PM
#6
Yes, look very much like there is a DL in the car. I wonder if the VBOX is hooked up to it and not he ECU direct.
07-20-2019, 04:48 PM
#7
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,677
Received 2,833 Likes
on
1,670 Posts
Power and ground in this application work, and the CAN out is for MoTeC/AiM/VBOX and AliveDrive (Cosworth’s video solution) works in several other installations with VBOX and AiM both. Have done it.
Trending Topics
07-21-2019, 01:56 AM
#8
Burning Brakes
Thread Starter
07-21-2019, 01:58 AM
#9
Burning Brakes
Thread Starter
No, there is an RLCAB015L to a DT06-04S for power/ground/CAN+/CAN- on the car now. PMNA specifically placed this on a bulkhead just inside the passenger side door sill for this purpose.
Power and ground in this application work, and the CAN out is for MoTeC/AiM/VBOX and AliveDrive (Cosworth’s video solution) works in several other installations with VBOX and AiM both. Have done it.
Power and ground in this application work, and the CAN out is for MoTeC/AiM/VBOX and AliveDrive (Cosworth’s video solution) works in several other installations with VBOX and AiM both. Have done it.
Meet someone over at BRR at Laguna Seca today that said he has a working scene for my car so I will try to test it out, so far have not had luck with the ones I have tried.
07-21-2019, 09:55 AM
#10
Burning Brakes
Thread Starter
The full sprint race #2 on Saturday.
Had a blast and had some fun trying to catch and pass the silver Cayman in front of me towards the end of the race.
Had a blast and had some fun trying to catch and pass the silver Cayman in front of me towards the end of the race.
07-21-2019, 10:00 AM
#11
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,677
Received 2,833 Likes
on
1,670 Posts
Good work, Alan!
07-21-2019, 01:14 PM
#12
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,677
Received 2,833 Likes
on
1,670 Posts
Great that you got it working by selecting the "Send Acknowledge" check box and setting the bus speed to 500!
Can't wait to see the video!
Can't wait to see the video!
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
07-21-2019, 06:44 PM
#14
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,677
Received 2,833 Likes
on
1,670 Posts
Yes, things got resolved. AS will post more videos in the future, I am SURE! He's loving that car.
07-22-2019, 12:08 AM
#15
Burning Brakes
Thread Starter
There were 2 for throttle position and it seems I had it on the wrong one as I could see on the circuit tools software brake pedal is the one to use.
Also gear is one higher then it should be so I might have to switch to math channel for it and ironically had the same issue with my AIM on my 981 CS.
Have a full one hour endurance race will upload in the next couple days.