Brake Pressure Sensor in-line adapter
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Brake Pressure Sensor in-line adapter
Hi all,
If you always wanted to see your brake pressure in your Boxster/Cayman (both 986/987) and 996/997/ and various cup cars, we just got a set of in-line adapters in that can make that happen. Easy to install between the master cylinder and ABS unit.
https://naroescapemotorsports.com/pr...ensor-adapter/
Remember to use renn10 for 10% off most orders to Rennlist members.
If you always wanted to see your brake pressure in your Boxster/Cayman (both 986/987) and 996/997/ and various cup cars, we just got a set of in-line adapters in that can make that happen. Easy to install between the master cylinder and ABS unit.
https://naroescapemotorsports.com/pr...ensor-adapter/
Remember to use renn10 for 10% off most orders to Rennlist members.
__________________
Bob Saville
Getting You On Track!
www.naroescapemotorsports.com
704-395-2975
'07 SPC
'71 914/6 Huey
'04 GT3
Bob Saville
Getting You On Track!
www.naroescapemotorsports.com
704-395-2975
- Data Analysis & Coaching
- Drivers Gear
- Crew Gear
- Car Gear
'07 SPC
'71 914/6 Huey
'04 GT3
Last edited by NaroEscape; 02-01-2019 at 01:31 PM.
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The male connections into the ABS and MC are M12x1.0, the female for the pressure sensor is 1/8" NPT.
The male connections are the standard connection size fittings into the ABS and master cylinder units for these cars. No other adapter or resizing necessary. I wish I had a picture of an install...
The male connections are the standard connection size fittings into the ABS and master cylinder units for these cars. No other adapter or resizing necessary. I wish I had a picture of an install...