When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mxl2
Hd smartycam
Standard def bullet can
Standard def smarty cam
Guy at track saying that the two SD cameras can't be triggered on due to the cameras being old
That doesn't make sense and also isn't what people all said when I asked here in December
Can someone give me directions on how to make that work?
"Guy at track saying that the two SD cameras can't be triggered on due to the cameras being old" Don't know what that means.
They (the SD smartycams) can be triggered by power on (logger control), or above a certain g measure (low=.2g, med=.4g, high=.8g).
__________________ -Peter Krause www.peterkrause.net www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
Found their mistake - they connected 3 cams and a gps to a non powered hub.....
Sometimes, if you charge them ALL up via USB, they'll work for awhile, but the AIM CAN doesn't have enough juice to run three cams, usually. Especially the GP's, both standard and HD.
I think that's a new record. Got plenty of folks running two, but that's ambitious! Good luck!
02-10-2018, 05:36 PM
Mxl2 won't start camera
