AIM MXL2 Brake Bias weirdness.
#1
Racer
Thread Starter
AIM MXL2 Brake Bias weirdness.
AIM MXL2 Brake Bias weirdness.
I was hoping someone can spot something I doing wrong.
I setup a math channel “BrakeBias” in my MXL2 dash so that BrakeBias=BrakeFront/(BrakeFront+BrakeRear):
When I plot the result it looks like the formula is instead BrakeBias=BrakeRear/(BrakeFront+BrakeRear):
BrakeBias should be 889.4/(889.4+399.3)=69.02% instead of the measured 31.68% at the time line.
If I reverse the math channel to BrakeBias=BrakeRear/(BrakeFront+BrakeRear):
BrakeBias should be 383.7/(821.6+383.7)=31.83% Instead of the math channel 32.04% (Close enough)
Why doesn’t the channel change? Any ideas appreciated
Thanks,
Greg
I was hoping someone can spot something I doing wrong.
I setup a math channel “BrakeBias” in my MXL2 dash so that BrakeBias=BrakeFront/(BrakeFront+BrakeRear):
When I plot the result it looks like the formula is instead BrakeBias=BrakeRear/(BrakeFront+BrakeRear):
BrakeBias should be 889.4/(889.4+399.3)=69.02% instead of the measured 31.68% at the time line.
If I reverse the math channel to BrakeBias=BrakeRear/(BrakeFront+BrakeRear):
BrakeBias should be 383.7/(821.6+383.7)=31.83% Instead of the math channel 32.04% (Close enough)
Why doesn’t the channel change? Any ideas appreciated
Thanks,
Greg