GP Automobile Renewal Service: Porsche C4S Cab - Phase 2, Nano, Clear Bra, and Tint
10-05-2015, 09:05 PM
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
GP Automobile Renewal Service: Porsche C4S Cab - Phase 2, Nano, Clear Bra, and Tint
Hard to believe, even new cars need some TLC. This is a typical New Car project for us and client wanted a nice balance between aesthetics and protection.
We performed a Phase 2, our Rejuvenation service focusing more on exterior. We then applied Suntek Topcoated PPF and performing our Advanced Clear Bra service. This level of service is for those demanding perfection. Anything that can safely be removed to give us that extra edge, is removed. We specialize in Porsches, so by now, we have a solid system of taking 911s apart and putting them back together as it were from the factory.
We then focused on protecting the interior occupants and leather surfaces with Huper Optik Nano Ceramic window film. We finally protected exterior paint using CQuartz Finest nano coating. All in all, we enjoyed this project and we hope you do too.
The devil is in the details. For us to achieve near flawless application, we remove various parts to allow for us to trim very close to edges and wrap around corners.
Crest is removed, clear film applied, hand trimmed, and crest is then reinstalled
Edges wrapped inside
Separate piece of film is used to achieve a clean and seamless edge wrapped around the door
Protected and better-than-new
Interior gets a light cleaning and conditioning
Smooth and satin finish; not greasy or shiny. This also retains the New-Car scent
We performed a Phase 2, our Rejuvenation service focusing more on exterior. We then applied Suntek Topcoated PPF and performing our Advanced Clear Bra service. This level of service is for those demanding perfection. Anything that can safely be removed to give us that extra edge, is removed. We specialize in Porsches, so by now, we have a solid system of taking 911s apart and putting them back together as it were from the factory.
We then focused on protecting the interior occupants and leather surfaces with Huper Optik Nano Ceramic window film. We finally protected exterior paint using CQuartz Finest nano coating. All in all, we enjoyed this project and we hope you do too.
The devil is in the details. For us to achieve near flawless application, we remove various parts to allow for us to trim very close to edges and wrap around corners.
Crest is removed, clear film applied, hand trimmed, and crest is then reinstalled
Edges wrapped inside
Separate piece of film is used to achieve a clean and seamless edge wrapped around the door
Protected and better-than-new
Interior gets a light cleaning and conditioning
Smooth and satin finish; not greasy or shiny. This also retains the New-Car scent
__________________
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
