gmgracing

GMG Porsche 996, 997, and 991 Seat Base for Aftermarket Racing Seats Now Available





GMG Racing is product to instroduce a seat base that utilizes the factory seat mounting provisions and provide a low-profile, flat surface for mounting aftermarket racing seats. All seat bases are specific to the Porsche 996, 997, and 991 chassis and are compatible with racing seats from leading manufacturers such as Sparco, Recaro, or Sabelt race seats, in both 12" and 14" wide frame sizes.

Unlike off the shelf seat bases from other manufacturers, the GMG Racing seatbase presents a solution to install the seats with lowest profile with the height of only 0.4375". The lower height achieved by the GMG Racing seat base will help position the driver's head to be lower than the top of the vehicle’s roll bar and maintain clearance from the headliner as well as giving additional helmet room. For easy installation, provisions for 12" and 14" wide seats are pre-drilled and tapped; with its precision CNC design, the provisions are perfectly parallel for smooth operation of the seat sliders.

To provide a strong flex-free mount, the GMG Racing seat base is constructed with 1/4" thick laser cut steel and features an attractive pocketed design for weight savings. In addition to the mouting holes provided for standard bolt-on installation, the GMG Racing base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). The seat base also feature threaded holes to directly mount 6 harnesses using SAE approved 7/16x20 hardware without drilling through the floor pan; to accomodate different driver heights, there are multiple locations. The base is powder coated in a black finish.

In order to properly install racing seats in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat

-GMG Racing Seat Base
-Track Set*
-Bottom Mount Hardware Kit

Side Mount Seat

-GMG Racing Seat Base
-Track Set*
-Side Mount
-Side Mount Hardware Kit

*The Track Set allows for forward and backward adjustment of the seat

Features

- CNC laser cut steel construction and pocketed for weight savings
- Total height 0.4375". Lowest profile floor mount available
- Squared rail mounts for narrow and wide frame side mounts and sliders.
- Integrated base for 5/6 point harness mounts pre-threaded for proper 7/16x20 SAE approved seat belt anchors
- Optional provisions for OEM inside seat belt mount available
- Will fit with Sparco, Recaro, OR Sabelt race seats

International Shipping is Available and Wholesale Inquiries are Welcomed

Professional installation is available at our facilities in Orange County, California.

GMG products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific: http://www.gmgracing.com/dealers/

For all questions, inquiries, or to place an order, please email Jerry@GMGRacing.com or Sales@GMGRacing.com