Do I really need to upgrade intercoolers with 997.2?
#1
Do I really need to upgrade intercoolers with 997.2?
I am trying to run the COBB Stage 3 map. Do I really need upgraded intercoolers to run it? I heard that the 997.2 IC's were amazing, and just as good or maybe even better.
Edit: I have a 997.2 Turbo S already
Stage 3
Edit: I have a 997.2 Turbo S already
Stage 3
- Exhaust Requirements: After-Market Exhaust System.
- High Flow Exhaust (larger diameter piping)
- High flow catalytic converters.
- Intake Requirements: Stock air box with stock air filter or upgraded panel filter.
- Intercooler Requirements: Aftermarket intercoolers required.
- Sensor Requirements: COBB 3BAR MAP/PUT Sensors required.
- Boost Targets: 20psi (+/-1.5 PSI) 91 octane, 21psi (+/-1.5 PSI) 93 octane, 23psi (+/-1.5 PSI) 100 octane.
Last edited by ca86108; 01-30-2019 at 07:08 PM.
#2
Burning Brakes
I am trying to run the COBB Stage 3 map. Do I really need upgraded intercoolers to run it? I heard that the 997.2 IC's were amazing, and just as good or maybe even better.
Stage 3
Stage 3
- Exhaust Requirements: After-Market Exhaust System.
- High Flow Exhaust (larger diameter piping)
- High flow catalytic converters.
- Intake Requirements: Stock air box with stock air filter or upgraded panel filter.
- Intercooler Requirements: Aftermarket intercoolers required.
- Sensor Requirements: COBB 3BAR MAP/PUT Sensors required.
- Boost Targets: 20psi (+/-1.5 PSI) 91 octane, 21psi (+/-1.5 PSI) 93 octane, 23psi (+/-1.5 PSI) 100 octane.
#3
#6
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,056
Received 2,010 Likes
on
1,261 Posts
OP, what did you end up doing here???
The stg. 3 tune couldn't be run on my car (seemed to run like crap) without the 3bar MAP sensor. Did you ever try it?
The stg. 3 tune couldn't be run on my car (seemed to run like crap) without the 3bar MAP sensor. Did you ever try it?
#7
Trending Topics
#8
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,056
Received 2,010 Likes
on
1,261 Posts
#10
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,056
Received 2,010 Likes
on
1,261 Posts
I was able to end up running the stage 3 OTS tune and the 100 octane tune after installing 3 bars sensors...Never ran great, but then Sam was able to make me a Custom Stage 2.5 tune that ended up running really well.
3 bar Maps allowed for more options for sure. Even with stock I.C.'s. (for short burst)
3 bar Maps allowed for more options for sure. Even with stock I.C.'s. (for short burst)
#11
I was able to end up running the stage 3 OTS tune and the 100 octane tune after installing 3 bars sensors...Never ran great, but then Sam was able to make me a Custom Stage 2.5 tune that ended up running really well.
3 bar Maps allowed for more options for sure. Even with stock I.C.'s. (for short burst)
3 bar Maps allowed for more options for sure. Even with stock I.C.'s. (for short burst)
exhaust: ?
cats: ?
headers: ?
intake: ?
airbox: ?
map sensor: 3 bar
intercooler: stock 997.2
#12
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,056
Received 2,010 Likes
on
1,261 Posts
-2012 997.2 Turbo S
-Europipe (EP1 - 100 cell cats)
-Cobb AP with PDK tune and Sam's 2.5 tune
-Cobb 3 bar map sensors
-Stock IC's
No other mods except a TPC DSC.
Last edited by Big Swole; 10-23-2020 at 01:36 PM.
The following users liked this post:
Jugo (10-29-2020)