Notices
997 Turbo Forum 2005-2012
Sponsored by:
Sponsored by:

Clutch line flush

Thread Tools
 
Search this Thread
 
Old 11-05-2018, 06:51 PM
  #1  
CHRIS WU
Racer
Thread Starter
 
CHRIS WU's Avatar
 
Join Date: Oct 2009
Location: LOS ANGLESE
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
Default Clutch line flush

Hope you all having a good day so far, my question is .....our cars(997.1 turbo), clutch fluid share with brake fluid or power steering fluid? If it is share with brake fluid then that's easy, but if they share it with power steering fluid, then how to you flush it? thanks you
Old 11-05-2018, 07:35 PM
  #2  
Kevin
Addict
Rennlist Member


Rennlist
Site Sponsor

 
Kevin's Avatar
 
Join Date: Jun 2001
Location: Northwest
Posts: 9,296
Received 304 Likes on 210 Posts
Default

Pentosin. The fill reservoir is located up front under the drivers side panel adjacent to the battery.
Old 11-05-2018, 10:23 PM
  #3  
CHRIS WU
Racer
Thread Starter
 
CHRIS WU's Avatar
 
Join Date: Oct 2009
Location: LOS ANGLESE
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you, found it under the cover.
So the motive bleeder should work ?
Old 11-06-2018, 12:31 AM
  #4  
mffarrell
Drifting
 
mffarrell's Avatar
 
Join Date: Jun 2004
Location: Vancouver WA (Southwestern) WA)
Posts: 2,087
Received 237 Likes on 171 Posts
Default

Originally Posted by CHRIS WU
Thank you, found it under the cover.
So the motive bleeder should work ?
Yes, just don’t cross contaminate brake fluid with pentosin, if you are using the same bleeder for both the brakes and the clutch hydraulic system.
Old 11-06-2018, 10:21 AM
  #5  
32krazy!
Drifting
 
32krazy!'s Avatar
 
Join Date: Jun 2012
Posts: 3,050
Likes: 0
Received 32 Likes on 24 Posts
Default

You need to mt the power steering reservoir then drain the clutch slave via the bleeder then you can fill the p/s and clutch res then start the bleed process
Old 11-13-2018, 01:26 PM
  #6  
CHRIS WU
Racer
Thread Starter
 
CHRIS WU's Avatar
 
Join Date: Oct 2009
Location: LOS ANGLESE
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
Default

Would you please explain little more in detal, thanks
Old 11-13-2018, 02:22 PM
  #7  
atcbi5
Banned
 
atcbi5's Avatar
 
Join Date: Jun 2008
Location: Florida
Posts: 1,988
Likes: 0
Received 104 Likes on 82 Posts
Default



I removed a customers complete system at his request and flushed all the lines from and to. Charged a little bit more since his engine was already out. Replaced both master and slave.



Quick Reply: Clutch line flush



All times are GMT -3. The time now is 12:36 AM.