Center Lock Nut-Disassembly Process
02-24-2018, 04:33 PM
#1
Instructor
Thread Starter
Update
There is an existing Porsche factory procedure on this which I had not seen before today.
Hold the assembly in your hand with the cone ring facing down
Lift the assembly up and slam it down onto a board and it should come apart.
Bill
Hold the assembly in your hand with the cone ring facing down
Lift the assembly up and slam it down onto a board and it should come apart.
Bill
Last edited by tinkerbill; 02-28-2018 at 02:54 PM. Reason: Update
