Which roll bar for GT2 and color??
05-15-2017, 01:18 PM
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
There isn't a wrong answer, white or red both look great. Personally, I like a bit of color pop and red looks great.
Here's an install we did on a monster GT2 last week to give you an idea of the installation of our two-piece RSR Harness/Rollbar.
Here's an install we did on a monster GT2 last week to give you an idea of the installation of our two-piece RSR Harness/Rollbar.
__________________
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
05-15-2017, 03:08 PM
#18
Rennlist Member
Thread Starter
Join Date: May 2017
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
There isn't a wrong answer, white or red both look great. Personally, I like a bit of color pop and red looks great.
Here's an install we did on a monster GT2 last week to give you an idea of the installation of our two-piece RSR Harness/Rollbar.
https://www.flickr.com/photos/gmgrac...57680405272194
Here's an install we did on a monster GT2 last week to give you an idea of the installation of our two-piece RSR Harness/Rollbar.
https://www.flickr.com/photos/gmgrac...57680405272194
05-15-2017, 03:32 PM
#19
for a street car i like the OEM Porsche Clubsport roll bar.
if it were my car i'd do black, but white is understandable as well. red is a bit bright for my taste, especially with the PCCB's. unless you're Ronald McDonald they clash imo.
if it were my car i'd do black, but white is understandable as well. red is a bit bright for my taste, especially with the PCCB's. unless you're Ronald McDonald they clash imo.
05-15-2017, 05:28 PM
#20
Rennlist Member
Thread Starter
Join Date: May 2017
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Was reading about clubsport bar creaking and being noisy?? Any truth to this and you may be right. Damn the yellow calipers. Yellow bar inside is too much for sure. Smh
05-16-2017, 11:29 PM
#23
Rennlist Member
Only very early 07 GT cars had rear seat belt mounts I believe, so you could not mount that harness bar in a GT.
SunCoast Porsche has a Tequipment Roll bar for sale - not sure of color.
https://www.suncoastparts.com/product/SKU996TEQ.html
https://www.suncoastparts.com/product/SKU996TEQ.html
05-31-2017, 08:01 PM
#26
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I think white will look best for a white car. Here are some pictures of our 996/997 BBi StreetCup Roll Bars powdercoated in Gloss White to match the exterior. We have the bars in stock.
- Jerry@BBiAutosport.com
- Jerry@BBiAutosport.com
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
06-04-2017, 01:42 PM
#27
Race Car
FWIW - My white BBI one has been in the RS now for several months. I'm totally happy with it.