GT3/RS track parts blowout - PFC, Wevo, AP, TS, OEM
#1
Rennlist Member
Thread Starter
GT3/RS track parts blowout - PFC, Wevo, AP, TS, OEM
OK, I've finally got the last of my parts out of the boxes to sell. Most of this is the perfect upgrade for track, or sporty use. It's also a combines my other thread with my OEM clubsport bar for sale. Honestly, this is a great package together, and I would sell all of it for a good deal as well. It totals $6900 separately, but would unload everything together for $6500.
1. PFC "race" rotors and hats - A pair of full floating 380mm race rotors w/anti rattle shims - fits all 997.1 GT3/RS w/PCCB, and all .2 GT3/RS. These are the better, 34mm thick "enduro" rings that are the same thickness as stock, utilizing the 17mm pads. The hats are the same, so you can use either 32mm or 34mm PFC race rings after these are done. This is the better setup over the 32mm rotors, as they have more heat capacity, and last longer. You run them until the slots dissapear, and they have lots of life left. $895 shipped.
2. - SOLD A full set of PFC08 pads, both front and rear have only one weekend on them, you can see they have tons of meat left. Will separate for $500 for the whole set.
3. AP Racing disc/hat - this setup is great too, and allows you to run all OEM shape pads, such as Pagid RS29, etc. etc.., including the PFC08 with OEM shape. This setup new is $2300 alone. Will sell for $750 shipped. New discs can be bought from TPC racing. Direct bolt on for .1 GT3/RS w/ PCCB, and all .2
4. SOLD WEVO SS engine mounts - proven upgrade. I would honestly install these over the .2 dynamic mounts. Fits all 997 GT3/RS. New these are $400+shipping, I'll take $225 shipped. Perfect condition.
5. SOLD Torque Solutions transmission poly bushings + mount - "Track" hardness - maybe my favorite upgrade. includes the brand new mount also, which was purchased as a set together. New was $375+shipping, I'll take $225 shipped.
6. OEM clubsport bar - orange - includes factory mounting plates. Great condition. $2500 + shipping
1. PFC "race" rotors and hats - A pair of full floating 380mm race rotors w/anti rattle shims - fits all 997.1 GT3/RS w/PCCB, and all .2 GT3/RS. These are the better, 34mm thick "enduro" rings that are the same thickness as stock, utilizing the 17mm pads. The hats are the same, so you can use either 32mm or 34mm PFC race rings after these are done. This is the better setup over the 32mm rotors, as they have more heat capacity, and last longer. You run them until the slots dissapear, and they have lots of life left. $895 shipped.
2. - SOLD A full set of PFC08 pads, both front and rear have only one weekend on them, you can see they have tons of meat left. Will separate for $500 for the whole set.
3. AP Racing disc/hat - this setup is great too, and allows you to run all OEM shape pads, such as Pagid RS29, etc. etc.., including the PFC08 with OEM shape. This setup new is $2300 alone. Will sell for $750 shipped. New discs can be bought from TPC racing. Direct bolt on for .1 GT3/RS w/ PCCB, and all .2
4. SOLD WEVO SS engine mounts - proven upgrade. I would honestly install these over the .2 dynamic mounts. Fits all 997 GT3/RS. New these are $400+shipping, I'll take $225 shipped. Perfect condition.
5. SOLD Torque Solutions transmission poly bushings + mount - "Track" hardness - maybe my favorite upgrade. includes the brand new mount also, which was purchased as a set together. New was $375+shipping, I'll take $225 shipped.
6. OEM clubsport bar - orange - includes factory mounting plates. Great condition. $2500 + shipping
Last edited by Mvez; 03-23-2015 at 09:53 PM.
#4
Rennlist Member
Thread Starter
Two sets of rotors and a clubsport bar left.
Can't believe nobody has snatched them up...cmon people, I need garage space for incoming parts.
Can't believe nobody has snatched them up...cmon people, I need garage space for incoming parts.
#5
Rennlist Member
Thread Starter
bump for a good set of PFC rotors. Everybody running PFC should have a full spare set, so they can maximize use of every rotor....just like having two sets of track wheels/tires, so you can run them till they cord.
Need these to go.
Need these to go.
Trending Topics
#9
Rennlist Member
And for anyone that buys MVEZ PFC rotors - See my thread on pads for these rotors - TONS of life left and will sell for a great deal! Get a killer braking setup for LOW $$$!!!
https://rennlist.com/forums/997-gt2-...full-sets.html
/ENDTHREADHIJACK :-)
https://rennlist.com/forums/997-gt2-...full-sets.html
/ENDTHREADHIJACK :-)
#10
Rennlist Member
Thread Starter
And for anyone that buys MVEZ PFC rotors - See my thread on pads for these rotors - TONS of life left and will sell for a great deal! Get a killer braking setup for LOW $$$!!!
https://rennlist.com/forums/997-gt2-...full-sets.html
/ENDTHREADHIJACK :-)
https://rennlist.com/forums/997-gt2-...full-sets.html
/ENDTHREADHIJACK :-)