When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have one as well, i wonder is it only attached in 2 point under the belt?
All 4 legs of the bar should be attached. The front 2 mount where the end of the seat belt would attach if you have sofa seats. The rear 2 are the same way and mount where you'd have the belt on a model with rear seats.
All 4 legs of the bar should be attached. The front 2 mount where the end of the seat belt would attach if you have sofa seats. The rear 2 are the same way and mount where you'd have the belt on a model with rear seats.
Thanks mounted this today, it was smooth but hade some problems with the bolts. Anyway, i din not mount the back legs... I have a gt3 no seats, no holes, what to do, drill holes?
Thanks mounted this today, it was smooth but hade some problems with the bolts. Anyway, i din not mount the back legs... I have a gt3 no seats, no holes, what to do, drill holes?
There are holes back there . You have to poke through the carpet.
Seats out of the car
Bar fully removed from the car
Prep all the holes for bolts
Use New bolts only
Coat all the bolts with anti seize
Make sure you have all 4 bolts started before you tighten any one down.
Have a ratchet or two on hand to squeeze the bar if necessary. Sometimes the holes won't line up perfectly. You may have to massage the bar a little, with the ratchets, to get the holes to line up properly.
Start wrenching down the bolts.
Just an FYI, your car is safer with no bar than the way you currently have the bar mounted. Fix soon.
Thanks mounted this today, it was smooth but hade some problems with the bolts. Anyway, i din not mount the back legs... I have a gt3 no seats, no holes, what to do, drill holes?
The threaded holes exist in the chassis but on models with no rear seats like the GT3 they are capped off with a plastic plug which itself is covered with some seam sealer type of stuff. You will have to pull the carpet to locate them.
There are holes back there . You have to poke through the carpet.
Seats out of the car
Bar fully removed from the car
Prep all the holes for bolts
Use New bolts only
Coat all the bolts with anti seize
Make sure you have all 4 bolts started before you tighten any one down.
Have a ratchet or two on hand to squeeze the bar if necessary. Sometimes the holes won't line up perfectly. You may have to massage the bar a little, with the ratchets, to get the holes to line up properly.
Start wrenching down the bolts.
Just an FYI, your car is safer with no bar than the way you currently have the bar mounted. Fix soon.
Good Luck, it's a nice bar btw.
Thank you!
Originally Posted by limitedslip
The threaded holes exist in the chassis but on models with no rear seats like the GT3 they are capped off with a plastic plug which itself is covered with some seam sealer type of stuff. You will have to pull the carpet to locate them.
The Blue loving enthusiasts spoke at the Carlisle Swap Meet - People's Choice....
I do it,... because it's the best parking spot on the day for $10!!
.... 1st place was a guy from Carlisle who told us he brought all his family & friends (highly modified 2008 turbo, white). now THATs the way to win a people's choice!
04-26-2021, 06:30 PM
