** GT3 CALIPER STUD KITS - PMNA **
#46
Former Vendor
Join Date: Feb 2012
Location: South Florida
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
#50
Nordschleife Master
It is figured out and all spelled out in my "FYI" thread.
Here is the executive summary from post 1 in that thread:
(8) nuts 999.076.083.01
(4) Rear Studs 999.061.004.02 for both 7.1 and 7.2 cars
(4) Front Studs 999.061.003.02 for 7.1 PCCB cars and all 7.2 cars
-or-
(4) Front Studs 999.061.007.01 for 7.1 non-PCCB cars
Here is the executive summary from post 1 in that thread:
(8) nuts 999.076.083.01
(4) Rear Studs 999.061.004.02 for both 7.1 and 7.2 cars
(4) Front Studs 999.061.003.02 for 7.1 PCCB cars and all 7.2 cars
-or-
(4) Front Studs 999.061.007.01 for 7.1 non-PCCB cars
#53
Former Vendor
Thread Starter
Yes it is figured out.
This is simply a statement to assure the correct lengths go out.
I will measure to be certain the measurements equals the part number.
Doesn't have a thing with rereading.
This is simply a statement to assure the correct lengths go out.
I will measure to be certain the measurements equals the part number.
Doesn't have a thing with rereading.
#55
Nordschleife Master
#58
Former Vendor
Thread Starter
Miracle of miracles, they did arrive. Sending out, look for a reinforced padded envelope via US Postal in yer mailbox.
Extras will be accounted for and PMs contacted,
THX
Extras will be accounted for and PMs contacted,
THX
#60
Craig, I emailed you a few weeks ago regarding the rear kit but I haven't heard anything from you...