Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   997 GT2/GT3 Forum (https://rennlist.com/forums/997-gt2-gt3-forum-141/)
-   -   RS door pulls (https://rennlist.com/forums/997-gt2-gt3-forum/575663-rs-door-pulls.html)

scott40 06-22-2010 07:08 PM

RS door pulls
 
Is there anyway to change these to yellow yet? If you spec a car with PCCB and yellow belts, the only red bit is the openers. Doesn't look that good to me.

A430v 06-22-2010 07:10 PM

Nope, I asked PCNA and PAG... Impossible. Pissed me off. :( I ordered the black door pulls from the Boxster Spyder from my Part's Dept.

scott40 06-22-2010 07:11 PM

But can you put the black ones in without much trouble?

Carrera GT 06-22-2010 07:13 PM


Originally Posted by scott40 (Post 7678643)
Is there anyway to change these to yellow yet? If you spec a car with PCCB and yellow belts, the only red bit is the openers. Doesn't look that good to me.

It's just a piece of nylon webbing strap -- you'd be able to find an auto upholstery place to replace it. I was thinking of replacing it with a bit of black leather and getting the plastic molding covered at the same time -- it looks pretty cheesy as it is and it's something right in front of you and you have to touch it every time you use the car, so I think it warrants a little upgrade. The only really cool thing about that strap is that, if you don't close the door before you strap into the seat, you can still just barely reach it with one finger. Otherwise you have to do the oh-so-not-cool drive-backwards-and-tap-the-brakes to get the door to swing closed. : )

A430v 06-23-2010 03:59 AM


Originally Posted by scott40 (Post 7678657)
But can you put the black ones in without much trouble?

Yup, talked to my tech. Door panels need to come off - but at most, a 30 min. to 45 min. job to replace both sides.

Clifton 06-23-2010 10:02 AM

Does anyone know a good place to look up the part# for the pulls and the assembly?

scott40 06-23-2010 10:18 AM

I really would want to get those redone in yellow. It would look great with yellow belts and PCCB.

A430v 06-23-2010 01:29 PM


Originally Posted by Clifton (Post 7680119)
Does anyone know a good place to look up the part# for the pulls and the assembly?

Part # for black door pulls from the Boxster Spyder: 987-555-563-00-A23. Not sure what the #s are for the assembly.

tcsracing1 06-23-2010 02:01 PM

i would avoid ordering yellow belts in a RS. (or any luxury options for that matter)

besides, concours guys will frown on those who change the door pulls! LOL!

JAMS 06-23-2010 02:06 PM

A430V is correct on the strap part number and the retail is 92.01 each. The full assembly part number is 987 555 381 00 A23 and 987 555 382 00 A23 and the retail price is $100.41 each. Check with Suncoast for a better price.

p.s. I doubt that the RS America parts are the same but I can't be sure.

ands8 06-23-2010 02:09 PM

1 Attachment(s)

Originally Posted by Carrera GT (Post 7678663)
It's just a piece of nylon webbing strap -- you'd be able to find an auto upholstery place to replace it. I was thinking of replacing it with a bit of black leather and getting the plastic molding covered at the same time -- it looks pretty cheesy as it is and it's something right in front of you and you have to touch it every time you use the car,

"....and you have to touch it every time you use the car,"
i read this yesterday & im stil cracking up :)


Originally Posted by Carrera GT (Post 7678663)
The only really cool thing about that strap is that, if you don't close the door before you strap into the seat, you can still just barely reach it with one finger. Otherwise you have to do the oh-so-not-cool drive-backwards-and-tap-the-brakes to get the door to swing closed. : )

or maybe you could just use the door handle :)

I also requested yellow straps to go with the yellow belts & brakes but received a similar answer. However, the red straps still match the red RS 3.8 logo in the seats & the red 6 point belts. Also, yellow straps may start to look a bit dirty with use.

carrering 06-23-2010 02:17 PM

my dad, my sister, and my mom all rode with me in the RS. they all reached for the door pull as a safety strap. I warned them it will eject them from the car. love the look they give you and they ask how do they hold on. just grab the side of the seat and pray for dear life! needless to say, love the strap. could care less that it doesn't match yellow calipers on the outside. i think they would get too dirty anyways since they are definitely tugged quite hard.

Sloth 06-23-2010 02:37 PM


Originally Posted by ands8 (Post 7680834)
"....
I also requested yellow straps to go with the yellow belts & brakes but received a similar answer. However, the red straps still match the red RS 3.8 logo in the seats & the red 6 point belts. Also, yellow straps may start to look a bit dirty with use.

No red RS 3.8 stitching on the seats here in the US. Seems that is only available on the cloth seats. I'd also be concerned about the yellow straps easily showing dirt. I know the yellow belts in my 6-GT3 were the only part that showed dirt from use.

JAMS 06-23-2010 03:03 PM

Black is really the most practical solution...

jenk12m 06-23-2010 03:21 PM

I wonder how long it would take someone to find a black strap on a black door that doesn't really know anything about porsches. Lol


All times are GMT -3. The time now is 03:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands