When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So what is the cost of this conversion? And before anyone responds with, "if you have to ask you can't afford it," -- true. I can't. But i'm still really curious to see by how much.
So what is the cost of this conversion? And before anyone responds with, "if you have to ask you can't afford it," -- true. I can't. But i'm still really curious to see by how much.
Originally Posted by Andrew930
It definitely get's out of its own way. Lol. The cost was a bit higher, because of the engine issue. We also opted to do as much as we could, both with performance and reliability while we were in there. All in was about 27k.
He stated in an earlier post. I'm curious to what the dyno results will be.
So what is the cost of this conversion? And before anyone responds with, "if you have to ask you can't afford it," -- true. I can't. But i'm still really curious to see by how much.
As I mentioned before, we found quite a bit wrong when we opened it up. After repairs and opting to check all the boxes with options, it ended up around 27k.
Originally Posted by GT2RSobsessed
He stated in an earlier post. I'm curious to what the dyno results will be.
The break in is half done. Once it's finished the first stop will be the dyno!
3.6 -> 4.0 Sounds like a great upgrade. I have a 3.8 997.2 C2S. Has anyone heard of a shop converting this to a 9a1 engine to a 4.1 or 4.2? It might be a point of diminishing returns.
Congrats! I have an 05 C2S and I'm considering the same 4L conversion. I'm very interested to hear your insights on comparing the characteristics between your GT3 engine and the built 4L engine. Responsiveness, power delivery, high RPM etc... I have the option right now to either swap in a GT3 engine/transmission or build out my motor (ignore financial reasoning ) and was wondering which would be the more exciting route.
3.6 -> 4.0 Sounds like a great upgrade. I have a 3.8 997.2 C2S. Has anyone heard of a shop converting this to a 9a1 engine to a 4.1 or 4.2? It might be a point of diminishing returns.
I don't believe the 9a1 engine has been bored to that size.
Originally Posted by platinum997
Is there any difference in end state with a 3.6 to 4.0 vs 3.8 to 4.0 ?
The end result is about the same.
Originally Posted by vern1
Welcome to the club !!
Thank you!
Originally Posted by sraz786
Congrats! I have an 05 C2S and I'm considering the same 4L conversion. I'm very interested to hear your insights on comparing the characteristics between your GT3 engine and the built 4L engine. Responsiveness, power delivery, high RPM etc... I have the option right now to either swap in a GT3 engine/transmission or build out my motor (ignore financial reasoning ) and was wondering which would be the more exciting route.
I would say they're very comparable in terms of performance. The biggest difference being that the Carrera is easier to drive every day.
Originally Posted by george_west
Also curious.
The 3.8 to 4.0 may have higher potential. 3.8 heads are different. Maybe intake, software etc..
How much different? Idk.
According the guys at LN, the end result is almost identical.
Originally Posted by sober_owl
did u go with regular ductile iron sleeves and forge pistons or the "nickeys" i keep hearing about? which are stronger but alot more money!!