FORGED WHEEL QUESTION: WHAT WOULD YOU PAY
#17
Thats before you get to the point of having obscene overhead and manufacturers profiting 65% on their wheels.
#18
Former Vendor
Thread Starter
Damn no one can answer a fuxxing question in here or what. The question was 'what would you pay'
The implied portion is 'if you could get a quality forged wheel, what would be a reasonable amount you'd be willing to part with'
Without all the fluff from throwing ragers at SEMA and puffed up overhead.. $3500 would be a reasonable price. I'd say an organization could actually make some quality forged wheels for $2500 or so.. which leaves about 30% profit on top for the folks involved. Thats before you get to the point of having obscene overhead and manufacturers profiting 65% on their wheels.
The implied portion is 'if you could get a quality forged wheel, what would be a reasonable amount you'd be willing to part with'
Without all the fluff from throwing ragers at SEMA and puffed up overhead.. $3500 would be a reasonable price. I'd say an organization could actually make some quality forged wheels for $2500 or so.. which leaves about 30% profit on top for the folks involved. Thats before you get to the point of having obscene overhead and manufacturers profiting 65% on their wheels.
Thanks again,
#20
RL Community Team
Rennlist Member
Rennlist Member
I say $3,995 as a set price including customized finish options (colors, polished, etc), but offer some Initial sets at a discount (maybe $3,250) to build the brand, a reputation, and get some photos of them installed on member cars.
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
#21
Former Vendor
Thread Starter
I say $3,995 as a set price including customized finish options (colors, polished, etc), but offer some Initial sets at a discount (maybe $3,250) to build the brand, a reputation, and get some photos of them installed on member cars.
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
info@wheeldynamics.com
Thank you,
#22
Rennlist Member
May I suggest a different approach?
1. Build a sample, so hard for someone to say "I am willing to pay $3500" for a Forged wheel I've never seen. Wheel purchases are emotional, ppl must like the design!
2. To help fund the first order, organize a proper group-buy, buyers need to put a deposit down. This reduces your risk, and shows REAL demand
3. Run one batch and see how it goes
1. Build a sample, so hard for someone to say "I am willing to pay $3500" for a Forged wheel I've never seen. Wheel purchases are emotional, ppl must like the design!
2. To help fund the first order, organize a proper group-buy, buyers need to put a deposit down. This reduces your risk, and shows REAL demand
3. Run one batch and see how it goes
#23
Intermediate
These guys have monoblock forged wheels at roughly $800 per wheel. Been around for years, popular within the Corvette community, good rep here too, not personally affiliated, yada yada yada.......
#25
For anyone who is NOT BBS or Volk, the most I would pay for forged wheels from a new manufacturer or any unknown is $3,000.00 MAX. More than that and I'm going straight to the best in the business, BBS.
#26
Drifting
Its less about what you would pay for me.
I remember in the late 8o's I loved a new ish company called HRE.
No distributors, no one had hear of them, no internet. Just magazines.
39 years later they are a currency.
Whatever I would pay for your wheels, I always have in the back of my mind ... what could I sell them for? Sorry I don't see you as a forged wheel producer ... yet.
HRE,BBS,ENKIE,CHAMPION, they will always have a reasonable resale value.
I'm sure your new forged wheel will be fantastic. Priced fairly, and they will sell. Push the price too much? People will opt for the extra couple of bucks for the established brand.
Depending on the value of my car? I would be good for 8oo-1ooo for a forged wheel. Plus rubber? $6K. That is a lot of shekels for my pot hole ridden street.
I have an idea? Offer rim insurance? 24 month coverage. That would be a first.
I remember in the late 8o's I loved a new ish company called HRE.
No distributors, no one had hear of them, no internet. Just magazines.
39 years later they are a currency.
Whatever I would pay for your wheels, I always have in the back of my mind ... what could I sell them for? Sorry I don't see you as a forged wheel producer ... yet.
HRE,BBS,ENKIE,CHAMPION, they will always have a reasonable resale value.
I'm sure your new forged wheel will be fantastic. Priced fairly, and they will sell. Push the price too much? People will opt for the extra couple of bucks for the established brand.
Depending on the value of my car? I would be good for 8oo-1ooo for a forged wheel. Plus rubber? $6K. That is a lot of shekels for my pot hole ridden street.
I have an idea? Offer rim insurance? 24 month coverage. That would be a first.
#27
Former Vendor
Thread Starter
I say $3,995 as a set price including customized finish options (colors, polished, etc), but offer some Initial sets at a discount (maybe $3,250) to build the brand, a reputation, and get some photos of them installed on member cars.
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
I'd be interested in a NB 997.1 GT3 fitment, 19" in a deep concave, stepped lip, twin 5-spoke, fully polished with clear powder coat set as an early adopter for you. Similar to this Varro wheel but forged and polished
or like these ADV1 SLs but with straighter spokes (these have a kink in the middle).
What's your release timing and any style teasers?
Thanks,
#28
Former Vendor
Thread Starter
Thanks for your input, all valid points, we are currently looking to offer a couple of different options, however on both we want to have a STRONG warranty so that customers know that if there is any manufacture defects that they will have a solid backing. We will offer a solid warranty for unmodified, undamaged wheels (we cannot honor wheels that have accidental damages ie. pot-holes, curb-rash etc.).
We are hoping to launch right off in the $750/range per wheel 19", this will include custom builds to your liking from 19x8" up to 19x11.5" we will be built to your order in a time frame of 6-8 weeks, however we are waiting to confirm details on final cost before releasing styles and other color options which will be included in the build.
Once again thank you for your input, we hope to have something nice in the near future as a new option for some of you.
In addition we will need a few feature vehicles (preferable modified) that we can use for photos and the buyer will receive a discount up to $300-500 off their set. (we will offer this out for a lucky few)
We are hoping to launch right off in the $750/range per wheel 19", this will include custom builds to your liking from 19x8" up to 19x11.5" we will be built to your order in a time frame of 6-8 weeks, however we are waiting to confirm details on final cost before releasing styles and other color options which will be included in the build.
Once again thank you for your input, we hope to have something nice in the near future as a new option for some of you.
In addition we will need a few feature vehicles (preferable modified) that we can use for photos and the buyer will receive a discount up to $300-500 off their set. (we will offer this out for a lucky few)
#29
Instructor
Join Date: Jan 2016
Location: Seattle, WA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
$3K is a great price point! Will these be brand new designs or forged versions of existing ones (i.e. the fuchs like OS Design II wheels, which would be amazing forged )
#30
Former Vendor
Thread Starter
We can build an 18" 3-pc wheel right now for you however those are built here in the USA so the cost is going to depend on a few options, feel free to message us directly for a quote.
info@wheeldynamic.com
info@wheeldynamic.com