|
997 Stone Guards Replaced
Stone guards replaced.
I purchased a set of OEM parts (997-504-826-04 and 997-504-825-04) from an online shop but item was delivered in damaged condition, box was smashed and parts had dirty marks. Shop refunded my order and they didn't request to return the parts (I used these damaged parts later to create my template). After the online shop issues, I decided to order the parts from my local dealer but, in the meantime, I found a video from carfanatic (I think he is a rennlist member) and I decided to give it a try: youtube.com/watch?v=O0IcnZ1JE30 Removing the parts was easy. I just left the car in the sun (Florida/Summertime) for 30 min and started to peel them off from the top to the bottom. Almost no residue was left behind. I then cleaned the area with P21S Paintwork Cleanser following with 91% Isopropyl Alcohol. I used the damaged OEM parts to create my template. In my first attempt to install the driver’s side I realized that I added too few baby shampoo to the water mix. The part wasn't sliding properly and it got stickied in some points creating marks on the film. It was OK but I later replaced the entire piece. The passenger's side was easier to install. Some things I learned in the process: - Get a brand new scissors to cut the film. - After marking the film with a permanent marker, wait at least 30 min to start cutting it. - Do not try to clean the film with alcohol, it removes the clear coat. - More baby shampoo is better than less. I think a good mix is 2 soup spoons of baby shampoo and 26 oz of water. Shake it a little before spraying it. - Don't be afraid of spraying shampoo/water mix to your car and on the film. The more you spray, the better. - Keep in mind that the film is stretchable. I started to install it from the top and could manage to stretch it while finishing the bottom to align it with the rocker panel line. - Patience is the key. If you make a mistake, don't panic! Just carefully pull the film off, spray both sides, spray the panel and try again. You can play with the film for hours as long as you keep it wet. Overall, I am very happy with the results. In a scale from 0-10 I would give it (myself ahaha) a 9.5. Car looks much much much better and cleaner now! Helpful threads and videos: OEM Clear Stone Guard DIY - PLEASE READ before trying - could save you some stress - EMC2 https://rennlist.com/forums/997-foru...me-stress.html Replacing 3M stone guards on rear fenders https://rennlist.com/forums/997-foru...r-fenders.html Clear Bra Removal & Install DIY - Porsche 911 Stone Guard Replacement youtube.com/watch?v=O0IcnZ1JE30 XPEL Rocker Panel Guard Clear - DIY youtube.com/watch?v=4mPlMtH3qeg How to safely remove clear bra youtube.com/watch?time_continue=32&v=BYH5emgD3ec DIY - Install Clear Bra using bulk film http://www.e90post.com/forums/showthread.php?t=62059 https://cimg2.ibsrv.net/gimg/rennlis...7ae389c62f.jpg https://cimg3.ibsrv.net/gimg/rennlis...8fcfa43833.jpg https://cimg4.ibsrv.net/gimg/rennlis...1fbce14878.jpg https://cimg5.ibsrv.net/gimg/rennlis...bf31a8327e.jpg https://cimg6.ibsrv.net/gimg/rennlis...8a4d8325d1.jpg https://cimg7.ibsrv.net/gimg/rennlis...b51a30fd78.jpg https://cimg8.ibsrv.net/gimg/rennlis...4e3defbecf.jpg https://cimg9.ibsrv.net/gimg/rennlis...c531667751.jpg https://cimg0.ibsrv.net/gimg/rennlis...5021bfb3bc.jpg https://cimg1.ibsrv.net/gimg/rennlis...95b061ea89.jpg |
7 year Maintenance
For the records, I just picked up the 997 at Drivers Choice Motors.
Current odometer: 18,845 miles Services performed: - oil/filter change (mobil one); - PDK clutch fluid change; - drive belt replacement (proactively); |
gorgeous perfect 997!
|
what seats are optioned in this? they look different than mine. no idea which I have lol
|
Originally Posted by halperin45
(Post 14544230)
what seats are optioned in this? they look different than mine. no idea which I have lol
P15 12-Way Power Seats XSC Porsche Crest Emboss Headrest PM me your VIN if you want a copy of your VIN build. |
Originally Posted by myw
(Post 14544148)
gorgeous perfect 997!
|
I just noticed, your car has the clear side markers. did it come like that or you replaced? Mine are amber. Where did you purchase those if so? looks nice. been comparing pics to see which look i like better lol
|
Originally Posted by halperin45
(Post 14567352)
I just noticed, your car has the clear side markers. did it come like that or you replaced? Mine are amber. Where did you purchase those if so? looks nice. been comparing pics to see which look i like better lol
Link: https://www.suncoastparts.com/product/PKCLEAR997.html It's an easy DIY project. I recommend you to search for "997 clear side markers installation" on youtube. |
Michelin Pilot Sport 4S PS4S 235/35 front and 305/30 rear
Moved from other thread.
** Thank you to the members that contributed to the thread. ** In need of new shoes, I decided to, while replacing tires, lower the car with Eibach Pro-Kit and add spacers to give it a more sportier look. Doing it all at same time will save me $350 in labor. I opted for Eibach to give the car a more conservative look. The perfect height IMO is the 997 with S-PASM suspension, which is 20mm lower than the 997 C2 with base suspension. Eibach lowers the car around 1" (25,4mm), which is very close to 20mm. Here is the setup: Stock Turbo II Wheels NB Front 8" x 19" ET57 Rear 11" x 19" ET67 Michelin Pilot Sport 4S PS4S Front 235/35 Rear 305/30 Eibach Pro-kit Performance Springs Part: 7217.140 Adaptec Spacers Front 10mm Rear 15mm Tires were delivered last Friday, just one day after placed my order on tirerack. Very impressive fast shipping! Eibach kit is on the way. Lenny from Adaptec promissed to ship the spacers today. https://cimg3.ibsrv.net/gimg/rennlis...6d5dbb5d45.jpg https://cimg9.ibsrv.net/gimg/rennlis...faee4deea4.jpg https://cimg1.ibsrv.net/gimg/rennlis...bf2e0d9b12.jpg https://cimg2.ibsrv.net/gimg/rennlis...0dae521d58.jpg https://cimg3.ibsrv.net/gimg/rennlis...055cd3049c.jpg https://cimg4.ibsrv.net/gimg/rennlis...eacb418ee6.jpg https://cimg5.ibsrv.net/gimg/rennlis...fceb8a6194.jpg |
what a coincidence, i am placing my order for 4 new tires this week at tire rack. will be having them drop shipped to drivers choice per your recommendation. i think im going with the s04 poles. looking forwarding to seeing your car after the height adjustment
|
Originally Posted by halperin45
(Post 14569152)
what a coincidence, i am placing my order for 4 new tires this week at tire rack. will be having them drop shipped to drivers choice per your recommendation. i think im going with the s04 poles. looking forwarding to seeing your car after the height adjustment
I opted for the Michelin PS4S because I like it's sidewall design. But I was tempted to order the S04 at around $1k. I hope to see you around at a local Cars and Coffee someday. |
|
update? :)
|
Originally Posted by myw
(Post 14587802)
update? :)
Kind of disappointed since they are rennlist sponsors. |
| All times are GMT -3. The time now is 08:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands