997 LED Tail Light Install Video - All Models - All Light Manufactures
#1
Former Vendor
Thread Starter
997 LED Tail Light Install Video - All Models - All Light Manufactures
So on the 997.1 we know that their a lot of LED manufactures out there. I feel the quality lacked a little bit with the optics of the led. I reached out for the raw parts to OSRAM SYLVANIA who make the factory led in some Audi, Mercedes, Wald and Porsche products. With their help I feel I got a good set of tail lights for the 997. We have tested them and after 2 years of development I am comfortable To offer them to You, The fine people of 6speedonline. I selling them for $699.99 with free shipping and if you have a 4S or GT3 we have the resistor and a diagram to cancel the warning light on the fog or lack of. I have the clears red available and I can smoke them to order. Our First 20 pair sold in store have been a success.
Wrenchmonkey.com is a new site that is going be sponsoring on here soon! If you become a Wrenchmonkey Member you can save 15% on the order or message me directly for a discount code.
Here is some Video and Photo's In the comments Below!!!!
Forum Special Price Direct to you Rennlist $600.00 shipped including red bulbs, resistor kit and Install Instructions
Email me and I'll get you a pay pal invoice saturndrcmedia@gmail.com
Wrenchmonkey.com is a new site that is going be sponsoring on here soon! If you become a Wrenchmonkey Member you can save 15% on the order or message me directly for a discount code.
Here is some Video and Photo's In the comments Below!!!!
Forum Special Price Direct to you Rennlist $600.00 shipped including red bulbs, resistor kit and Install Instructions
Email me and I'll get you a pay pal invoice saturndrcmedia@gmail.com
#3
Former Vendor
Thread Starter
997 LED Tail Light Group Buy Red Bulb Install
IMG]http://www.6speedonline.com/forums/attachment.php?attachmentid=200969&dateline=1358974690[/IMG]
Trending Topics
#8
Former Vendor
Thread Starter
As Promised my Install Video I made for the Non-Turbo Cars but I do Cover the turbo resistor placement as well. I also Include and Install Diagram and resistors on all orders.
#9
Former Vendor
Thread Starter
997 Brake Light install vs Fog Light Plug DIY HELP LED Tail Lights
So there has been a little confusion on the install and people are getting the fog harness and Brake light harness mixed up they look the same their both 3 pin harness and white.
Here is the Fog Harness
3pin
gray/white stripe -rear fog,
grey/ red stripe driving (also the pin or side to put the tape on the bulb so the fog bulb does not glow when the lights are on at night)
brown is groung
The Stop Light / Brake Light Harness
3 pin harness
brown is ground
orange/ Black stripe Break Light
Grey / Red stripe is the running lights
Hope this helps clear up any confusion
Also Here is a photo of the Turn Singal wires T-Taps that are included with the lights!
Here is the Fog Harness
3pin
gray/white stripe -rear fog,
grey/ red stripe driving (also the pin or side to put the tape on the bulb so the fog bulb does not glow when the lights are on at night)
brown is groung
The Stop Light / Brake Light Harness
3 pin harness
brown is ground
orange/ Black stripe Break Light
Grey / Red stripe is the running lights
Hope this helps clear up any confusion
Also Here is a photo of the Turn Singal wires T-Taps that are included with the lights!
#10
Rennlist Member
Looking good. That GT3 is just awesome.
#11
Rennlist Member
Join Date: Aug 2012
Location: So.California
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
I went to Del Rey customs today to have the front DRL installed. Wow made a big improvement over stock. Saturn had his guys do the install no charge. Couldn't ask for better service, very nice guy, here's a pic of the installed light.
#13
Former Vendor
Thread Starter
Supplies are getting low at the special price
1. Tony tail paid instore - install
2. phil combo paid - shipped
3. reggie combo paid- instore install
4. marcin dtr paid -shipped
5. dan dtr paid -instore install
6. john tail paid - shipped
7 Conrad tail -paid shipped
8. stephan dtr - paid - shipped
9. Franco combo - paid -shipped
10. dan h. - tail paid -shipped
11. Robert A- paid - tail shipped
12. Yann - combo -paid shipped
13. Chris M - combo - paid shipped
14. Cesar - combo - paid shipped
15 Eric - combo -paid shipped
16 Ernesto - DTR - paid shipped
17 Heiendrick - tail paid in store
18. center collision - dtr -paid shipped
19. mark - tails in store paid install
20. dan - dtr in store paid install
21. h.ardeep - combo -paid shipped
22. steve - combo - paid shipped
23. jeff - tails - paid shipped
24. shaun- tails paid shipped
so totals to date and availability remaining
tail lights 17 sets 3 remaining $600.00
DTR 15 setss 5 remaining $485.00
combos ordered 9 ordered at the $1050.00 shipped with resistors and red bulbs included
Take advantage of this deal. The price will go up I'm loosing my rear end on shipping!
2. phil combo paid - shipped
3. reggie combo paid- instore install
4. marcin dtr paid -shipped
5. dan dtr paid -instore install
6. john tail paid - shipped
7 Conrad tail -paid shipped
8. stephan dtr - paid - shipped
9. Franco combo - paid -shipped
10. dan h. - tail paid -shipped
11. Robert A- paid - tail shipped
12. Yann - combo -paid shipped
13. Chris M - combo - paid shipped
14. Cesar - combo - paid shipped
15 Eric - combo -paid shipped
16 Ernesto - DTR - paid shipped
17 Heiendrick - tail paid in store
18. center collision - dtr -paid shipped
19. mark - tails in store paid install
20. dan - dtr in store paid install
21. h.ardeep - combo -paid shipped
22. steve - combo - paid shipped
23. jeff - tails - paid shipped
24. shaun- tails paid shipped
so totals to date and availability remaining
tail lights 17 sets 3 remaining $600.00
DTR 15 setss 5 remaining $485.00
combos ordered 9 ordered at the $1050.00 shipped with resistors and red bulbs included
Take advantage of this deal. The price will go up I'm loosing my rear end on shipping!
#14
Former Vendor
Thread Starter
Fog Light LED error FIX, LED Bulb Install
So Here's some stuff I hope will help
I done some work on a few cars yesterday and this is what I came up with...
If your using the red bulb you need 1 set of resistor juston the driver side and here is the photo. If you tape of the parking light prong inside the scoket, the car still see the parking light for the 2 other s****ets that share the same circuit. so the fix would need to be added to just the driver side. the pass side has no current on the grey/white i metered it.
Now if you want to run no bulb the should work as well
now If for no bulb or you want to go with red led/smd bulbs then there are 3 sets of resistor needed. to clear the code.
I hope this helps may work on other manufactures as well.
Email me if you need extra resistors. If your not using them on the turn singal try just the driver.
simple kit 1 loop @15 shipped
deluxe 3 loop kit $45 shipped
Email me SaturnDRCmedia@gmail.com to order
I done some work on a few cars yesterday and this is what I came up with...
If your using the red bulb you need 1 set of resistor juston the driver side and here is the photo. If you tape of the parking light prong inside the scoket, the car still see the parking light for the 2 other s****ets that share the same circuit. so the fix would need to be added to just the driver side. the pass side has no current on the grey/white i metered it.
Now if you want to run no bulb the should work as well
now If for no bulb or you want to go with red led/smd bulbs then there are 3 sets of resistor needed. to clear the code.
I hope this helps may work on other manufactures as well.
Email me if you need extra resistors. If your not using them on the turn singal try just the driver.
simple kit 1 loop @15 shipped
deluxe 3 loop kit $45 shipped
Email me SaturnDRCmedia@gmail.com to order