What did you do to your 997 today?
#8326
Spent hours last night watching bore scoring videos from flat6innovations.
Took the car our for a drive, came home, put it up on the lift and pulled out the engine stethoscope again.
All cylinders sounded the same, all quiet, no rythmic ticking, phew!
It’s amazing how paranoid these things can make you.
But, better to be safe than sorry.
Took the car our for a drive, came home, put it up on the lift and pulled out the engine stethoscope again.
All cylinders sounded the same, all quiet, no rythmic ticking, phew!
It’s amazing how paranoid these things can make you.
But, better to be safe than sorry.
#8328
Pro
I augmented my owner's manual with a cheap old Winbook TW700 running Durametric:
This is a real Windows PC (running 8.1) that I can keep inside the owner's manual pouch (it snaps closed) in the glovebox, so I don't need to lug my usual big laptop around for scanning and logging.
This is a real Windows PC (running 8.1) that I can keep inside the owner's manual pouch (it snaps closed) in the glovebox, so I don't need to lug my usual big laptop around for scanning and logging.
#8329
I augmented my owner's manual with a cheap old Winbook TW700 running Durametric:
This is a real Windows PC (running 8.1) that I can keep inside the owner's manual pouch (it snaps closed) in the glovebox, so I don't need to lug my usual big laptop around for scanning and logging.
This is a real Windows PC (running 8.1) that I can keep inside the owner's manual pouch (it snaps closed) in the glovebox, so I don't need to lug my usual big laptop around for scanning and logging.
What hardware is that, and presumably a USB interface to the OBD port?
#8330
Pro
http://www.durametric.com/default.aspx
I bought the 3-VIN limited enthusiast version for $287. I had a bit of difficulty installing the .NET framework under Windows 8.1 and am not quite sure how I finally got it to work, but it did. These days, Windows 10 machines are more common and shouldn't have the same difficulty.
#8331
Bought a new steering wheel from Suncoast Parts and had it fitted the day before yesterday... Very happy with the result...
Old:
New:
Old:
New:
#8333
Could you do me a favour and measure the diameter and thickness of both the old and the new wheel?
I'm still deciding on which one to go for; I understood the sport design wheel is a bit smaller and thicker...
Also, is the silver trim on the old wheel an exact colour match with the rest of the silver trim (vent surrounds, cupholder cover, door handles,...)?
I know the sport design wheel is a bit more shiny, aluminium looking...
#8336
Advanced
Busy day trying to play with the car on and off so wife wouldn’t notice.. installed....
- Suncoast LED interior light bulbs
- rennsport cell phone holder
- SmartTOP controller
- lloyds floor mats
- center vent
- and ordered Moshammer aero kit
#8339
Advanced
Beautiful!
The following users liked this post:
flapjacksteve (02-25-2022)