When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Petza 914 sweet! I already have the bilstein damptronincs with mono ball mounts and tarret drop links on the front. Hopefully this round of mods will keep me happy for a minute
nsGTS yeah, that’s the job I’ve been dreading and procrastinating on, I’ve had those solid subframe bushings in the garage for over 3 years now
In the garage now about to go under the knife again, I lack a couple parts but I’m gonna get started anyway
Wow, you're practically going to end up with the feeling of a whole new car. Can't wait to hear your reaction to the improvements! How many miles are on the car currently?
After being out to the country for a month I took the cover off, disconnected trickle charger, started right up and went for a drive. Loved it.
Nothing better! It's why I risk parking it at the airport when I go on trips where I'll be returning at a time that doesn't correspond to rush hour. It's a great pick me up, to drive the 997 home, after all the grief of air travel...T
Skwerl 150k, I installed most of the parts, didn’t do the lower control arms because of some bad Georgia math... I went with one set of stromski racing 17mm wider inner mono ***** (way too long, gota send them back and get standard ones). Didn’t do the subframe mounts ( chickened out and the tranny mount and insert I’m still waiting on the AGA tool.
Gonna do some alignment stuff today and take her out...
Johnny DB yes, those are PCCB’s
Last edited by frederickcook87; 07-19-2018 at 09:04 PM.
Reason: Typo
Skwerl 150k, I installed most of the parts, didn’t do the lower control are because of some bad Georgia math... I went with one set of stromski racing 17mm wider inner mono ***** (way too long, gota send them back and get standard ones). Didn’t do the subframe mounts ( chickened out and the tranny mount and insert I’m still waiting on the AGA tool.
Gonna do some alignment stuff today and take her out...
07-17-2018, 11:45 PM
