X51 airbox - Plenum
#2
I replied on 6 speed no, and that is still the case.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
#3
I replied on 6 speed no, and that is still the case.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
#4
I replied on 6 speed no, and that is still the case.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
If you are having problems it probably is an air air leak caused by what ever adapter you chose to use at the Throttle Body. I used the following hose and cut it to length about a 1/2" from Boostcontroller.com, ASCSH2-325BK. The dealer I bought the air box from said a certain Hoover Vacuum Belt worked well too. I posted the part # here or on 6speed.
Even with the correct size adapter it is a tight fit on the TB. I found I had to trim some of the X-51 hose to get it to fit on the TB correctly in addition getting the clamp on correctly can be a little tricky.
If you are having a problem with idle and CEL I am about 99% sure it is that area. There really is nothing else that I can think of that could go wrong.
Couldnt find ASCSH2-325BK, only #ASCSHS2-X. Silicone Straight Hose, SHORT - 2 inch length. Is it the same as you got?
#5
Probably, if the inside diameter is the same 3.25".
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
#6
Probably, if the inside diameter is the same 3.25".
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
dnd, could you post a pic of your setup? "A picture is worth a thousand words".
Thanks.
Dave
Trending Topics
#8
Probably, if the inside diameter is the same 3.25".
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
Length doesn't matter you only need a 1/2".
Here is some info from one of my old posts;
As far as Adapters I bought the following from BoostController.com and after cutting it length with an exacto blade it worked perfectly;
Silicone Straight Hose, SHORT - 2 inch length #ASCSHS2-X
Size - 3.25 inch ID (add 5.00)
Color - Black
The dealer who sold me the parts also recommended the following; Hoover Vacuum belt for the Self Propelled WindTunnel is a perfect fit (part number 38528-035).
I also had to trim a little bit off the edge of the x-51 Boot to get it to fit correctly on the TB. I also had to push the clamp on in that same area with a screw driver.
Since I live in Norway, can anybody be so helpfull to order the parts I need and help me ship to me? I will of course pay upfront for all costs.
I wil check if someone in my home town can help me also, but I don't think so.
Thanks.
#10
Sure
I can mail you what I have, they will work but are not perfect.
Or I could buy it have it shipped to you.
e-mail me at ddodd100@charter.net or call me at 205-981-1022
Or I could buy it have it shipped to you.
e-mail me at ddodd100@charter.net or call me at 205-981-1022
#11
I can mail you what I have, they will work but are not perfect.
Or I could buy it have it shipped to you.
e-mail me at ddodd100@charter.net or call me at 205-981-1022
Or I could buy it have it shipped to you.
e-mail me at ddodd100@charter.net or call me at 205-981-1022
If I understand you correct, the Silicone Straight Hose, SHORT #ASCSHS2-X
size 3.25 ID is not the perfect solution.
Is the Hoover Vacuum belt, part number 38528-035 the better solution?
#12
It worked perfect for me. I only had a 2" piece. I used both ends by experimenting with one and using the other. The experiment is usable as is the center piece it just doesn't have a perfectly straight edge.
The vacuum belt is what the dealer said their mechanic used on their conversions.
The vacuum belt is what the dealer said their mechanic used on their conversions.
#15
Race Director
Has anyone figured out what you would need from boostcontroller.com for a silicone hose replacment for the stock 997S airbox. Bacisally like what Fabspeed does but a heck of a lot cheaper is price.
thanks!
thanks!