spare mounted
Here's a way to bolt the spare down. Rivet the weldment to the chassis in location indicated.
|
Questions
1. Where did the bracket come from? 2. What kind of a spare is it? 997? 996? thanks! bob |
Originally Posted by Bob/Ft. Worth
Questions
1. Where did the bracket come from? 2. What kind of a spare is it? 997? 996? thanks! bob tire is from 996: P/N 996-362-020-02 |
Here's what I believe you need:
996-362-620-02 Emerg tire (996) 996-722-101-00 Wheel Insert 996-721-211-00 Scissors Jack 999-571-074-30 Mounting Bolt 999-361-521-00 Tire Bolt 996-361-411-00 Belt Dan |
Originally Posted by Edgy01
Here's what I believe you need:
996-362-620-02 Emerg tire (996) Dan :confused: |
Originally Posted by Edgy01
Here's what I believe you need:
996-362-620-02 Emerg tire (996) 996-722-101-00 Wheel Insert 996-721-211-00 Scissors Jack 999-571-074-30 Mounting Bolt 999-361-521-00 Tire Bolt 996-361-411-00 Belt Dan Is it safe to assume this kit works with 997? What's the purpose of the tire bolt and the belt? |
Originally Posted by snarf
Thanks for the info:
Is it safe to assume this kit works with 997? What's the purpose of the tire bolt and the belt? The mounting bolt is simply an aid to help align/mount the wheel onto hub so the actual bolts can be started Not really necessary but makes it easier to wrangle it. I'm guessing that the other bolt is to screw in to hold the tire down into the 996 trunk |
Thanks for the correction. I didn't have my reading glasses on!
Will price it out at the factory. Dan |
Originally Posted by Edgy01
Thanks for the correction. I didn't have my reading glasses on!
Will price it out at the factory. Dan Make sure you get the collapsible spare from the 996 C4. Like an accordian, the full width of the sidewall *only* becomes apparent when fully inflated. The 996 C2 (and 986 boxster) spare is too big to be situated in trunk verticaly and must be slanted to close trunk thus using up all the room. here's collapsible spare *before fully inflated:* :cheers: |
Originally Posted by MMD
(WILL fit over rotors, even s rotors though).
|
Now all you need is a cover to go over it and it would look like it came from the factory that way..
|
Originally Posted by snarf
Thanks MMD, but just for clarity it will fit over the S rotors right?
|
Thanks MMD. very helpful!
bob |
Originally Posted by Bob/Ft. Worth
Thanks MMD. very helpful!
bob |
Once again many thanks, I've already started searching for a UK source. :thumbup:
|
All times are GMT -3. The time now is 08:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands