991 Sports Lip / Spoiler Adapter for 997.2 - DONE!
#166
Burning Brakes
Thread Starter
I also have photos coming soon of two sets of NB skirts that were made recently (one on a red, and one on gray 997.2 NB)
If not already done, please subscribe to the thread below for updates:
https://rennlist.com/forums/997-foru...97-2-done.html
#167
Hey EMC2 - finally got round to putting a couple more pics up of my 997.1 with a 991 spoiler using your kit.
The car is a late '07 C4S which came from the factory with a pretty cool spec: X51, sports chassis, carbon kit, dynamic sports seats etc. It also has BMC filters, rennsport engine mounts, 200 cell cats and a remap amongst other things.
It gets used a lot (and pretty hard too), so it's not a minter by any stretch, but it's pretty hardcore, loud and leary and gets plenty of looks. The stripes are just for Le Mans next month, but the spoiler is there for good. 👍
#168
Burning Brakes
Thread Starter
Thanks for sharing the pics and details CM.
The stripes look really good - especially with the other black accents (headlight rings and spoiler)
The stripes look really good - especially with the other black accents (headlight rings and spoiler)
Hey EMC2 - finally got round to putting a couple more pics up of my 997.1 with a 991 spoiler using your kit.
The car is a late '07 C4S which came from the factory with a pretty cool spec: X51, sports chassis, carbon kit, dynamic sports seats etc. It also has BMC filters, rennsport engine mounts, 200 cell cats and a remap amongst other things.
It gets used a lot (and pretty hard too), so it's not a minter by any stretch, but it's pretty hardcore, loud and leary and gets plenty of looks. The stripes are just for Le Mans next month, but the spoiler is there for good. 👍
The car is a late '07 C4S which came from the factory with a pretty cool spec: X51, sports chassis, carbon kit, dynamic sports seats etc. It also has BMC filters, rennsport engine mounts, 200 cell cats and a remap amongst other things.
It gets used a lot (and pretty hard too), so it's not a minter by any stretch, but it's pretty hardcore, loud and leary and gets plenty of looks. The stripes are just for Le Mans next month, but the spoiler is there for good. 👍
#170
Burning Brakes
Thread Starter
Yes, several members have done this install with lowered 997.2's (including mine below on TechArt springs, which are very similar in drop to Eibach).
You can certainly scrape on very steep slopes if you're not careful, but it is very manageable as long as you know the limits.
#171
Racer
Re installed my 991 lip
Reinstalled my 991 lip. Removed it a few months ago as the lip was beaten due to low clearance (coilovers). Sanded the 991 lip a bit to smoothen the damage sections. Clips and locks were holding up despite the abuse it got and re-used them but strengthened the end wings with screws at both ends
While at it, I installed the radiator grill as well. Now im just waiting for the production of side skirt of EMC.
While at it, I installed the radiator grill as well. Now im just waiting for the production of side skirt of EMC.
Last edited by JQ911; 05-27-2019 at 09:41 PM.
The following users liked this post:
myw (04-19-2020)
#172
Burning Brakes
Thread Starter
Reinstalled my 991 lip. Removed it a few months ago as the lip was beaten due to low clearance (coilovers). Sanded the 991 lip a bit to smoothen the damage sections. Clips and locks were holding up despite the abuse it got and re-used them but strengthened the end wings with screws at both ends
While at it, I installed the radiator grill as well. Now im just waiting for the production of side skirt of EMC.
While at it, I installed the radiator grill as well. Now im just waiting for the production of side skirt of EMC.
#173
Three Wheelin'
EMC2- I know you were taking some time off to figure out the side skirts. Any bolt on kits left before you took the time off?
#174
Burning Brakes
Thread Starter
#175
Burning Brakes
Thread Starter
Update - Il have one more 997.2 Kit available to ship. (A or B config)
#177
Burning Brakes
Thread Starter
#178
Burning Brakes
Thread Starter
Thanks to a member in Norway for sending me the pic below - a 997.2 Kit B install:
#180
Burning Brakes
Thread Starter