997.1 rear bumper GT3 Rs look 899 shipped in the continental usa
09-22-2017, 06:11 PM
#16
Rennlist Member
Looks nice ! I will hold off ordering until matters posted on this forum are resolved.....
Do I need to concern about water leaking down the top bumper vent ? What's down there ?
Am I suppose to cut the license plate area to allow for the bumperettes ? or is there a version that will accommodate the bumperettes ?
Do I need to concern about water leaking down the top bumper vent ? What's down there ?
Am I suppose to cut the license plate area to allow for the bumperettes ? or is there a version that will accommodate the bumperettes ?
09-23-2017, 12:49 PM
#18
Former Vendor
Thread Starter
Hello Rennlisters
We have most of our parts in stock I do not have any of the rear bumpers in stock right now, we sold the 3 we had.
If you would like to place an order, we can make one for you and charge as soon as the rear bumper ships, we can make the bumper with your name on it in a weeks time or less if you are interested here is a video on the installation
There is a flange on the top center vent that slides the water out and a screen to avoid any trash coming in to the bumper in the back you have only the trunk compartment the mufflers are on the sides.
The bumperettes are optional to those that want the European version you have to remove 8 pop rivets that hold an aluminum bracket.
If you want the bumperettes there is a pattern on the back part of the bumper you can cut out for the bumperettes to slide in.
We have most of our parts in stock I do not have any of the rear bumpers in stock right now, we sold the 3 we had.
If you would like to place an order, we can make one for you and charge as soon as the rear bumper ships, we can make the bumper with your name on it in a weeks time or less if you are interested here is a video on the installation
The bumperettes are optional to those that want the European version you have to remove 8 pop rivets that hold an aluminum bracket.
If you want the bumperettes there is a pattern on the back part of the bumper you can cut out for the bumperettes to slide in.
09-27-2017, 08:21 PM
#19
Former Vendor
Thread Starter
Hello Fellow Rennlisters we would like to clarify a few things with our members.
We have been accused of being scammers which we are not and never will, yes we have been VERY slow in answering emails and answering the phone.
The last 16 months have been very challenging to us first we had a fire in our polyurethane factory due to arson. In this incident we were forced to relocate of which set us back many months due to california's strict hazmat laws. And more than 5 times, yet again were forced to shut down and setting us back from shipping parts due to the halt in manufacturing.
We had our entire small crew working the poly machines, thus not being able to answer calls or emails to fulfill orders.
Another thing has set us back is that our precision injection machines are very sensitive and parts require many changes and many times these parts break and are very slow to arrive. We are told these parts would arrive in a couple of days and would turn to a couple of weeks.
The change took so long that the material had sat for a few months and we lost more than 6 very expensive drums of material. We would like to thank all our customers that hung in there and were very patient and also apologize to all for any inconvenience.
We will continue to improve our service and manufacturing very high quality and precise polyurethane parts.
There is really no justification just want to let you know our side if the story. So for the meanwhile we will only advertise what is available to ship until our inventory reaches its pinnacle of a 48 hour turnaround on any product the way it was for the last 30 years. Thank you.
We have been accused of being scammers which we are not and never will, yes we have been VERY slow in answering emails and answering the phone.
The last 16 months have been very challenging to us first we had a fire in our polyurethane factory due to arson. In this incident we were forced to relocate of which set us back many months due to california's strict hazmat laws. And more than 5 times, yet again were forced to shut down and setting us back from shipping parts due to the halt in manufacturing.
We had our entire small crew working the poly machines, thus not being able to answer calls or emails to fulfill orders.
Another thing has set us back is that our precision injection machines are very sensitive and parts require many changes and many times these parts break and are very slow to arrive. We are told these parts would arrive in a couple of days and would turn to a couple of weeks.
The change took so long that the material had sat for a few months and we lost more than 6 very expensive drums of material. We would like to thank all our customers that hung in there and were very patient and also apologize to all for any inconvenience.
We will continue to improve our service and manufacturing very high quality and precise polyurethane parts.
There is really no justification just want to let you know our side if the story. So for the meanwhile we will only advertise what is available to ship until our inventory reaches its pinnacle of a 48 hour turnaround on any product the way it was for the last 30 years. Thank you.
