Ultimate Motorwerks Rear Wing Lift Cylinder Repair Kit
#93
Three Wheelin'
May be you can ask "grenncalex" to fabricate one? https://rennlist.com/forums/996-turb...wing-pump.html
Last edited by jpflip; 12-16-2017 at 10:24 AM.
#96
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
The engineering feature that I offer with my design is reinforced CNC'd brass features to reduce the stress on the replacement orings. If one does have a future failure you can take the cylinder cartridges apart and repair for $0.40
The cost of repair is $248.00 per cylinder...
The cost of repair is $248.00 per cylinder...
#97
PM sent,
Thanks,
Rob
Thanks,
Rob
#98
I just ran into this when I did a search for 996 turbo wing repair: https://www.youtube.com/watch?v=mRHUeuESl-U
I'm in.
I'm in.
#99
Just picked up my rebuilt system at the post office on my way into the office. Install tonight. Looking forward to a functioning unit (on the car). Will report back post-install and testing. Thanks Kevin!
-Joe
-Joe
#100
RL Community Team
Rennlist Member
Rennlist Member
#101
Kevin is awesome to work with, his solution works! I had him bench bleed and test the system for the extra $100, it came from him all boxed up clean and ready to install. No muss, no fuss. Has been working for a few weeks now
#104
Kevin to the rescue for failed Spoiler.
Very much interested, but how to locate if it is the failed hydraulic cylinders or the hydraulic pump, the spoiler works for now but gives an error message in the dash.
Please suggest Kevin
Very much interested, but how to locate if it is the failed hydraulic cylinders or the hydraulic pump, the spoiler works for now but gives an error message in the dash.
Please suggest Kevin
The following users liked this post:
3stewarts (03-14-2021)
#105
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
You will need to refill the hydraulic system with Pentosin and bleed. In this thread https://rennlist.com/forums/997-turb...epair-kit.html
Go to post # 10 for simple procedure.
Go to post # 10 for simple procedure.