Looking for advice on PSS10 settings
#1
Rennlist Member
Thread Starter
Join Date: Feb 2010
Location: Kincardine & Waterloo, Ontario
Posts: 28
Likes: 0
Received 1 Like
on
1 Post
Looking for advice on PSS10 settings
I run a 2004 996 Turbo X50. It has K24 turbos and a Softronic chip. Currently pulling 520HP and 530 ft/lbs torque. Last Summer replaced the stock suspension with PSS10's, initial settings were German Sports car ride height, and +6 front, +6 rear.
This gives a very comfortable ride on the road (wife's VERY happy about that), but feels a little loose for the track. Any suggestions on initial track settings?
This gives a very comfortable ride on the road (wife's VERY happy about that), but feels a little loose for the track. Any suggestions on initial track settings?
#2
Rennlist Member
Curious about this, as well. My car had PSS10's on it when I bought it -- I don't even know what it's set to but the ride and handling both feel great.
#3
Three Wheelin'
I'm running them on a 993, so a different chassis, but after a lot of experimentation I found that 6 front and 7 rear works very well on the street. On the track I'd probably do 8/9 or 9/10.
Here's my thread with lots of PSS10 thoughts: https://rennlist.com/forums/993-foru...-question.html
Here's my thread with lots of PSS10 thoughts: https://rennlist.com/forums/993-foru...-question.html