I broke the front spoiler lip off of my 996 TT this morning...
#1
6th Gear
Thread Starter
I broke the front spoiler lip off of my 996 TT this morning...
I know I'm not the only Porsche owner that has to navigate a steep driveway and I usually do a good job by entering and exiting at an extreme angle, but this morning the inevitable happened and I pulled off the front spoiler. I'm wondering if anyone in the group has replaced the front spoiler on their 996 TT with a non-turbo version that isn't as deep to allow for extra clearance when entering/exiting a steep incline.
2004 996 TT front spoiler lip casualty.
2004 996 TT front spoiler lip casualty.
The following users liked this post:
FairlyMoody (11-29-2021)
The following users liked this post:
FairlyMoody (11-29-2021)
#4
RL Community Team
Rennlist Member
Rennlist Member
I have gone to the C4S front lip.
There is no aftermarket version of the C4S lip. If you search around you can find an OEM for under $200.
https://www.suncoastparts.com/produc...55550201C.html
There is no aftermarket version of the C4S lip. If you search around you can find an OEM for under $200.
https://www.suncoastparts.com/produc...55550201C.html
Last edited by Carlo_Carrera; 11-27-2021 at 05:12 PM.
The following users liked this post:
FairlyMoody (11-29-2021)
#5
Drifting
I've damaged 3 Ebay replacements, tore the last one right off. My car is low, too low, but I did raise it up half an inch before I lost my last one. I've just left it off for the last year and I think I will for now.
The following users liked this post:
FairlyMoody (11-29-2021)
The following users liked this post:
FairlyMoody (11-29-2021)
Trending Topics
#9
Rennlist Member
#11
Rennlist Member
I need to order a new front lip. how does this one look? I can't recall what the tabs look like. are they missing from this one?
https://www.ebay.ca/itm/201485257451...Bk9SR7zV26XTYw
on ebay they have some ones I haven't seen before and they say its for 996 turbo but looks like a lot of fabrication work necessary. wonder if anyone tried this type?
https://www.ebay.ca/itm/175529338260...3ABFBMvNXbpdNj
https://www.ebay.ca/itm/201485257451...Bk9SR7zV26XTYw
on ebay they have some ones I haven't seen before and they say its for 996 turbo but looks like a lot of fabrication work necessary. wonder if anyone tried this type?
https://www.ebay.ca/itm/175529338260...3ABFBMvNXbpdNj
#12
Rennlist Member
the one at the top I listed has an extra installation kit. not sure if needed.
this one seems to have the holes already and looks like easier install, what do you guys think
:
https://www.ebay.ca/itm/111329523531....c101506.m1851
I should probably order 2.
this one seems to have the holes already and looks like easier install, what do you guys think
:
https://www.ebay.ca/itm/111329523531....c101506.m1851
I should probably order 2.
The following 2 users liked this post by Third-Reef:
Carlo_Carrera (04-01-2024),
Duc Hunter (04-01-2024)