GMG Racing Special Group Buy: CSF Aluminum Radiator for Porsche 996 Turbo
CSF All Aluminum Race Radiator for Porsche 996 997 Carerra GT2 GT3 and Turbo Models
GMG Racing Special Group Buy Ending May 15th Very Limited Quantities Available http://www.6speedonline.com/forums/a...ine=1398066316 http://www.6speedonline.com/forums/a...ine=1398066316 In collaboration with CSF, GMG Racing is excited to introduce their line of All Aluminum Race Radiators for the Porsche 996 & 997 Carrera, GT2, GT3, and Turbo models. Each CSF Radiator is crafted from aluminum, and features upgraded surface area and stronger cross tubes for improved efficiency and cooling. Aluminum Endtanks and Mounting Points http://www.6speedonline.com/forums/a...ine=1398066316 http://www.6speedonline.com/forums/a...ine=1398066316 The CSF All Aluminum Race Radiator features aluminum endtanks and mounting points versus the weak plastic ones of the OEM units. The stock plastic endtanks start to degrade and become brittle over about 5-7 years time and tend to crack under high stress or vibration. CSF's all-aluminum endtank design are more durable and will last the lifetime of the vehicle. http://www.6speedonline.com/forums/a...ine=1398066316 The mounting points are all CNC machined aluminum as well versus the stock plastic mounting points. These are the parts of the tanks that tend to break off the most, especially during racing. When cars have bumper contact, or during high vibrations (i.e veering off track, going over bumps/ track chicane, high speeds, etc), the plastic mounting points tend to crack or break off, and the radiator starts to immediately leak fluid. 2 Row Core (dual core) with B-Tube Technology http://www.6speedonline.com/forums/a...ine=1398066316 The CSF All Aluminum Race Radiator utilizes a 2 row core (dual core) with B-Tube technology rather than the single row of the stock unit. The B-tube technology is exclusive to CSF in the N. American high performance aftermarket. The B structure of the tube is stronger than a normal "oval" welded type tube. Because of the structure, lighter and thinner aluminum can be used for better heat transfer. This also makes the unit extremely lightweig.ht, weighs just as much as the OEM unit. Also the seam down the middle creates more surface area contact with the coolant for a total heat transfer benefit versus stock of about 20%, and it will keep even the most powerful and demanding engines cool even if pushed in extreme temperatures and conditions. CSF designed these radiators to “drop in fit”, requiring no modifications to OEM mounting brackets and stock radiator location. Features: - Mirror Polished Finish - Precision ‘SAE Standard’ Filler Neck (Standard Caps Available) - Drop-In Fitment Requiring No Modifications - OE Specific Mounting Location - Pressure Tested at 50% Higher Pressure Than OE Units - 40% Higher Burst Strength Over OE Units - All Aluminum Drain Plugs - High Performance Multi-Louvered Fins - Innovative ‘B-Tube’ Technology About CSF http://www.6speedonline.com/forums/a...ine=1398066316 http://www.6speedonline.com/forums/a...ine=1398066316 http://www.6speedonline.com/forums/a...ine=1398066316 During the last 40 years, CSF has manufactured over 10,000 different models of radiators, oil coolers, heat exchangers, and condensers for automotive, truck, and industrial applications. CSF provides the best valued radiators and condensers that are designed to meet or exceed original equipment (OE) engineering specifications. All CSF radiators undergo a rigorous testing process in their state-of-the-art testing lab. CSF’s procedures and requirements set the bar for cooling system relia http://www.6speedonline.com/forums/a...ine=1398066316 Tests Performed: Individually leak tested Vibration cycle tested Thermal cycle tested Wind tunnel tested for optimal radiator core cooling efficiency Burst pressure and impulse cycle tested 10,000 times for strength Salt spray tested for corrosion protection 10 foot "box drop" test to ensure packaging protection 30 point fitment inspection on critical dimensions to ensure OE fitment with no modifications necessary For all inquiries, or to place an order, please email Jerry@GMGRacing.com |
I think I speak for most but what are the prices?
|
PM'd
|
it would be nice to know the regular price and sales price
|
Originally Posted by fly2low
(Post 11311170)
it would be nice to know the regular price and sales price
Center: MSRP: $499 - sale price: $449 + free shipping |
thank you
|
Hi GMG and CFS,
How do we get in on this buy? Looks like my right radiator is actually passing a small amount of wetness and the left has dried crusties on top. I'm thinking of replacing both of them. Should I do the center one at the same time? I believe it is dry for now. Does the center one commonly fail? Thanks, Franny |
Franny,
Please send me an email to Jerry@GMGRacing.com with your name, shipping address, and phone number |
Thanks!
I just sent off an email for all three... Franny |
Thank you Franny. Looking foward to get these radiators out to you.
- Jerry |
Radiators are in stock now, and will start shipping this week to all pre-order customers!
We've almost sold out of the 1st 25 sets, so jump on now. |
Pm sent on a set for a 996tt.
|
waiting patiently for mine
|
Good news everyone.. All orders have been shipped out!!!!
We have about 4 more complete sets (L,R,C) left in stock.. contact: Jerry@gmgracing.com to get your radiators in time for summer! |
Where are they shipping from? Can we get a tracking #? UPS?
Thanks, Franny |
All times are GMT -3. The time now is 07:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands