What did you do to your 996TT today?
RL Community Team
Rennlist Member
Rennlist Member
New (old) battery swapped out.
Rennlist Member
So with the new non-dead battery and the new starter, is your car firing right up? Curious if you have any more issues of the battery draining after a short drive.
RL Community Team
Rennlist Member
Rennlist Member
So far, seems ok... I have to take the truck in tomorrow, so I'm going to let it sit for the day, and take it in Friday, and out to Delta.
Battery is my spare, so aging. Supplier is sending me a new one tomorrow.
Battery is my spare, so aging. Supplier is sending me a new one tomorrow.
RL Community Team
Rennlist Member
Rennlist Member
You have many turbos....
Rennlist Member
compound quad turbo?
Rennlist Member
RL Community Team
Rennlist Member
Rennlist Member
Interesting - so what are the specs on the Techarts?
Race Car
Installed a really nice Momo wheel. Now my hands don't hit my legs when I turn the wheel.
Did a track day. A beautiful day which ended up being a crashfest and breakdown-fest for some reason. Out of 1 hour I got 12 hot laps @ 85 seconds each. I went with Ed @69911 and his son and some friends.
Did a track day. A beautiful day which ended up being a crashfest and breakdown-fest for some reason. Out of 1 hour I got 12 hot laps @ 85 seconds each. I went with Ed @69911 and his son and some friends.
The following users liked this post:
9!!_VA (05-28-2023)
RL Community Team
Rennlist Member
Rennlist Member
That's a cool wheel.
RL Community Team
Rennlist Member
Rennlist Member
Intake now coated with heat dispersion coating, all intake parts done now.
The following users liked this post:
radaray58 (05-20-2023)
Rennlist Member
What coating?
RL Community Team
Rennlist Member
Rennlist Member
That the Techline one, I do not believe Cerakote has a heat dispersal coating.
Rennlist Member
Last edited by pfbz; 05-19-2023 at 10:45 PM.
The following users liked this post:
radaray58 (05-20-2023)
RL Community Team
Rennlist Member
Rennlist Member
Do a nice mileage run.. try not to stop, use cruise and see what it does; the 996 is now turning over 27.4mpg, so definitely an improvement.
I'm thinking about getting a spray gun and doing my own coating - the Cerakote cures at room temps, Techline needs an oven..
I'm thinking about getting a spray gun and doing my own coating - the Cerakote cures at room temps, Techline needs an oven..