Camber plates
#1
Camber plates
Will GT2 or GT3 camber plates (spring strut mounts) fit on my 996tt with PSS9?
Any drawbacks if it's possible using them?
Reason i ask is that i feel movement in the upper part of damper when applying weight on the front. Also movement in the stop plate under the locking nut (damper top). Some clik clak noise when vertical moving also.
This cannot be normal or ???
Any drawbacks if it's possible using them?
Reason i ask is that i feel movement in the upper part of damper when applying weight on the front. Also movement in the stop plate under the locking nut (damper top). Some clik clak noise when vertical moving also.
This cannot be normal or ???
#2
Rennlist Member
There was a recent thread about a PSS9 install that had a rattle. Turns out Bilstein included a extra washer that tapped on the mounting. Check up in the collapsible boot of the shock making the noise and you may save yourself a trip to the shop. Of course the shock has to be dismounted to get the washer off. Do a search for that thread because that guy had pictures of the problem. It could also be the spring moving on the perch ring.
Last edited by Land Jet; 07-13-2007 at 07:03 AM.