Sale 996GT3RS complete magnesium uprights
08-15-2018, 07:11 PM
#1
Former Vendor
Thread Starter
Sale 996GT3RS complete magnesium uprights
Brand new, were only used as a test fit for different suspension setup, 996GT3RS complete hollow magnesium uprights. 2999 EUR
P.S. If you think it's too much, here is the Cost for bare uprights was 3280 EUR + 200 EUR bearings + 100 EUR covers with bolts + 500 EUR hubs + 440 EUR tension bolt and nut = 4520 EUR + around 500 EUR was assembled those parts together.
Check yourself here, 99734115793 https://www.porsche.com/germany/acce...s/default.ashx
Will fit any 996 and 997.1. Assembled by dealer with all Original Porsche parts. No longer available from Porsche. Huge upgrade for suspension kinematic especially in AWD models.
Most universal version: Made for 350mm calliper but additionally available adapter to install 380mm calliper for 399 EUR (retail was 530 EUR).
Also additionally available adapter to use any 350 or 380mm discs from TURBO models. 99 EUR (retail was 200 EUR)
So you don't need to change your existing 350mm or 380mm TURBO brake setup. Can work with PCCB as well. But of course will work with any GT2/3 brake setup w/o adapter.
Can be used on a 996 CUP cars as well, as an upgrade for GT3/CUP uprights as those are 996 RSR version.
P.S. If you think it's too much, here is the Cost for bare uprights was 3280 EUR + 200 EUR bearings + 100 EUR covers with bolts + 500 EUR hubs + 440 EUR tension bolt and nut = 4520 EUR + around 500 EUR was assembled those parts together.
Check yourself here, 99734115793 https://www.porsche.com/germany/acce...s/default.ashx
Will fit any 996 and 997.1. Assembled by dealer with all Original Porsche parts. No longer available from Porsche. Huge upgrade for suspension kinematic especially in AWD models.
Most universal version: Made for 350mm calliper but additionally available adapter to install 380mm calliper for 399 EUR (retail was 530 EUR).
Also additionally available adapter to use any 350 or 380mm discs from TURBO models. 99 EUR (retail was 200 EUR)
So you don't need to change your existing 350mm or 380mm TURBO brake setup. Can work with PCCB as well. But of course will work with any GT2/3 brake setup w/o adapter.
Can be used on a 996 CUP cars as well, as an upgrade for GT3/CUP uprights as those are 996 RSR version.
Last edited by Scuderia V; 08-17-2018 at 12:59 PM.
08-15-2018, 08:13 PM
#2
RL Community Team
Rennlist Member
Rennlist Member
Wow, those are sexy.
08-16-2018, 01:02 PM
#5
Roger! I'm running the 380 brake version of these uprights. Same parts except they are made for 380 brakes without having to use the adapters. For anyone considering these parts they are very rare and hard to find. Buying these is a good score. If you decide to install these, you will need to install the matching rear RS uprights as they have substantially lowered upper and lower wishbone pickup points that effectively raise the roll centers to match the fronts.
Installing just the fronts without the rears is not a good idea as the front to rear roll centers will be grossly mismatched which will effectively increase understeer (akin to running a super stiff front anti roll bar) including a host of other issues. You want to do it as a pair. These are very nice parts. Good luck to the lucky buyer!
Installing just the fronts without the rears is not a good idea as the front to rear roll centers will be grossly mismatched which will effectively increase understeer (akin to running a super stiff front anti roll bar) including a host of other issues. You want to do it as a pair. These are very nice parts. Good luck to the lucky buyer!
Last edited by powdrhound; 08-16-2018 at 01:33 PM.
