Pics of Pirelli Slick Size on 12"
#1
Rennlist Member
Thread Starter
Pics of Pirelli Slick Size on 12"
Found a good thread discussiing Pirelli slicks here https://rennlist.com/forums/997-gt2-...rear-size.html but have a few questions:
I have some 305 660 18 in my garage and was wondering if anyone has ran them on a 12" wheel and if so do they have pics? They seems to be a decent bit smaller than a 315/30 NT-01 which seem to fill a 12" wheel without bulging
Also does anyone have pics of a 305 680 on a 12" wheel?
And finally I have some 325 660 18 (these seem to be the best) but does anyone ahve pics they could share?
Thanks in advance
I have some 305 660 18 in my garage and was wondering if anyone has ran them on a 12" wheel and if so do they have pics? They seems to be a decent bit smaller than a 315/30 NT-01 which seem to fill a 12" wheel without bulging
Also does anyone have pics of a 305 680 on a 12" wheel?
And finally I have some 325 660 18 (these seem to be the best) but does anyone ahve pics they could share?
Thanks in advance
Last edited by Jferrante; 02-14-2017 at 10:33 AM.
#2
I'd be nervous about the load rating on the 305/660. It's narrow. 305/680 is a 996Cup size run on an 11" wheel. It's very tall. 325/660 is what I'd go with Joe..
#3
Rennlist Member
Thread Starter
Joe
#7
Rennlist Member
Thread Starter
I am thinking 13" rear too which powdrhound runs. Not sure if a 325 slick will be too stretched on it though.
Trending Topics
#8
Yea i am on a WB 996tt so too wide for me vs the 6gt3 is different. The pirellis are narrow compared to NT-01's. I find the 325 Pirelli smaller than a 315 NT-01 is overall width.
I am thinking 13" rear too which powdrhound runs. Not sure if a 325 slick will be too stretched on it though.
I am thinking 13" rear too which powdrhound runs. Not sure if a 325 slick will be too stretched on it though.
#9
I've also run Nitto NT01 in the past, but these are the various sizes of Hoosier R6 and Yokohama / Pirelli slicks that I'm currently running. In these photos, the Yokos are not on rims. Others are on 18" x 8.5" and 9" fronts, and 11" rears.
#10
Rennlist Member
Thread Starter
325 on 13s should be fine. Hoosier 320/650-18 is listed as a 13" wheel tire. It's not too short either at 25.8 which is good as it should handle a decent load. I'm going to try those in conjunction with a 265/645 on a 10". Stretch is good... 7RSR runs 310/710s on 14" wheel...
#11
#12
Rennlist Member
Thread Starter
#13
Burning Brakes
I had a stack of 245/315 NTs against R6 245/315 and was surprised by how much taller R6 (wider) Hoosiers were. Will be using both 245/305NTs and used 245/315 R6 next weekend.