Another PCCB question: I've read none of the 996 GT3s came with gen II PCCBs.....
#1
Rennlist Member
Thread Starter
Another PCCB question: I've read none of the 996 GT3s came with gen II PCCBs.....
but, many people swapped over to the gen II PCCBs.
I bought my car used, how do I know which rotors I have?
Thanks.
I bought my car used, how do I know which rotors I have?
Thanks.
#3
Nordschleife Master
Don't hold me to it so you'll have to check into it but what I understand is that Gen 1 was NOT offered on the 996GT3 (ie, 04 and the few left over that were sold as 05's). However, there are some that have Gen 2 on them after a warranty claim fitted them.
#5
Rennlist Member
Thread Starter
Yeah, I am w/ Dell.. I think none of the 6GT3 comes w/ Gen II.
As the second owner, I'm not sure.
Trending Topics
#8
Nordschleife Master
No 996 GT3 came with GENII. I did put them on the front. My GENI lasted about 25,000 miles. I sold my car at about 61,000 miles and the GEN II were smooth as glass. The rears were original and like new
#9
Rennlist Member
Thread Starter
996.351.031.92 Left Gen I
996.351.031.93 Left Gen II
996.351.032.92 Right Gen I
996.351.032.93 Right Gen II
996.351.031.93 Left Gen II
996.351.032.92 Right Gen I
996.351.032.93 Right Gen II
No 996 GT3 came with GENII.
Mine have 39,000 miles on them and are PERFECT. I'm crossing my fingers that they are the Gen IIs he put on.
#10
Three Wheelin'
Thank god the good Dr never tracked the car
#11
Rennlist Member
Thread Starter
lol I'll be ashamed if you have Gen I's
AND...............I'm going to bunch my panties up, throw them on the ground, have a tantrum and write someone a strong worded letter about my disappointment and concern for my safety
#12
Rennlist Member
The 2004 and 2005 996 GT3 PCCB System is the same. We never got an answer why the Porsche parts listing has the 996.351.031.93 as 2005 rather than 2004 and up. Maybe it was some warranty replacement thing only for the model year 2005 996 GT3?
roberga, do your Generation II PCCB have the Generation I hole pattern or the 997 PCCB pattern?
roberga, do your Generation II PCCB have the Generation I hole pattern or the 997 PCCB pattern?
#13
Burning Brakes
The *only* person I found who swapped to gen ii was roberga who has already chimed in
so I don't know who the other folks are but most don't since steel is cheaper
That's what I ended up doing too
#14
Drifting